As per IS 732, a leakage current in an installation should not exceed __________ of the full load current.
Answer & step-by-step solution
Under the IS 732 rule referenced by the paper, installation leakage current should not exceed 1/5000 of the full-load current. Limiting leakage is important for shock protection, insulation health and avoiding unwanted protective-device operation.
Concept & Reasoning
Leakage current is current flowing through insulation/protective paths under normal conditions. The acceptable limit is small compared with load current. For this historical code-based MCQ, use the specified fractional limit exactly as tested.
How to Solve It in the Exam
Leakage limit is a very small fraction: 1/5000 in this question.
Important Exam Point
Standards can be edition-specific; preserve the exam's referenced code context.
Quick Trick
Leakage limit is a very small fraction: 1/5000 in this question.
Common Mistake
Choosing 1/100 simply because it is easier to remember; that would be far too large.
IS 732 के अनुसार किसी संस्थापन में लीकेज धारा पूर्ण लोड धारा के __________ से अधिक नहीं होनी चाहिए।
उत्तर और चरणबद्ध हल
IS 732 नियम के अनुसार संस्थापन की लीकेज धारा पूर्ण-लोड धारा के 1/5000 से अधिक नहीं होनी चाहिए। लीकेज सीमित रखना झटका सुरक्षा, इंसुलेशन स्वास्थ्य और अनचाहे ट्रिप से बचाव के लिए ज़रूरी है।
विस्तृत हल (मूल भाषा में)
Concept & Reasoning
Leakage current is current flowing through insulation/protective paths under normal conditions. The acceptable limit is small compared with load current. For this historical code-based MCQ, use the specified fractional limit exactly as tested.
How to Solve It in the Exam
Leakage limit is a very small fraction: 1/5000 in this question.
Important Exam Point
Standards can be edition-specific; preserve the exam's referenced code context.
Quick Trick
Leakage limit is a very small fraction: 1/5000 in this question.
Common Mistake
Choosing 1/100 simply because it is easier to remember; that would be far too large.
IS 732 મુજબ કોઈ સ્થાપનમાં લીકેજ પ્રવાહ પૂર્ણ લોડ પ્રવાહના __________ થી વધુ ન હોવો જોઈએ.
જવાબ અને પગલાવાર ઉકેલ
IS 732 નિયમ મુજબ સ્થાપનનો લીકેજ પ્રવાહ પૂર્ણ-લોડ પ્રવાહના 1/5000 થી વધુ ન હોવો જોઈએ. લીકેજ મર્યાદિત રાખવો આંચકા સામે રક્ષણ, ઇન્સ્યુલેશન આરોગ્ય અને બિનજરૂરી ટ્રિપથી બચવા માટે જરૂરી છે.
વિગતવાર ઉકેલ (મૂળ ભાષામાં)
Concept & Reasoning
Leakage current is current flowing through insulation/protective paths under normal conditions. The acceptable limit is small compared with load current. For this historical code-based MCQ, use the specified fractional limit exactly as tested.
How to Solve It in the Exam
Leakage limit is a very small fraction: 1/5000 in this question.
Important Exam Point
Standards can be edition-specific; preserve the exam's referenced code context.
Quick Trick
Leakage limit is a very small fraction: 1/5000 in this question.
Common Mistake
Choosing 1/100 simply because it is easier to remember; that would be far too large.
More IS Codes & IE Rules questions