सहायक अभियंता (विद्युत), वर्ग-2, सड़क Master Question Paper (BPB) - Technical Section (Series M)
चुना हुआ पेपर

सहायक अभियंता (विद्युत), वर्ग-2, सड़क Master Question Paper (BPB) - Technical Section (Series M)

180 MCQs

सभी पेपर
फिल्टर्स
लाइव MCQ प्रैक्टिस

सहायक अभियंता (विद्युत), वर्ग-2, सड़क Master Question Paper (BPB) - Technical Section (Series M)

180 MCQs · एक विकल्प चुनें

0 / 180उत्तर दिए
0सही0गलत
Sign in होने पर progress आपके SRO profile में सेव होती है।
Q1
Easy2025✓ Verified

निम्नलिखित में से कौन सा AC सर्किट में शिखर मान का सही प्रतिनिधित्व है?

Electrical Engineering · AC Fundamentals
Q2
Easy2025✓ Verified

What is the direction of the electric field at a point?

Electrical Engineering · Electric Field
Q4
Easy2025✓ Verified

How many electrons will constitute 2 Coulombs of electric charge?

Electrical Engineering · Electric Charge
Q5
Easy2025✓ Verified

How does induced emf in DC motor react to supply voltage?

Electrical Engineering · DC Machines
Q7
Easy2025✓ Verified

What will be the current density of a metal if a current of 30A is passed through a cross-sectional area of 0.5m2?

Electrical Engineering · Current and Current Density
Q8
Easy2025✓ Verified

वह पदार्थ जिसकी सापेक्ष पारगम्यता मुक्त स्थान की पारगम्यता से कम है _____________ है।

Electrical Engineering · Magnetic Materials
Q9
Easy2025✓ Verified

प्रतिचुंबकीय पदार्थों की सापेक्ष पारगम्यता _____________ होती है।

Electrical Engineering · Magnetic Materials
Q10
Easy2025✓ Verified

What happens to the MMF when the magnetic flux decreases?

Electrical Engineering · Magnetic Circuits
Q11
Easy2025✓ Verified

Can we apply Kirchhoff’s law to magnetic circuits?

Electrical Engineering · Magnetic Circuits
Q12
Easy2025✓ Verified

KCL is based on the fact that

Electrical Engineering · Kirchhoff's Laws
Q13
Easy2025✓ Verified

आदर्श प्रेरक में शक्ति अपव्यय है

Electrical Engineering · AC Circuits
Q14
Easy2025✓ Verified

To obtain wide bandwidth, network is designed with which of the following?

Electrical Engineering · Resonance
Q16
Moderate2025✓ Verified

If 4 equations are required to describe a circuit by Mesh-Current method and there are n nodes, then how many branches are there in the network?

Electrical Engineering · Graph Theory
Q17
Easy2025✓ Verified

डेल्टा-कनेक्टेड लोड में, लाइन वोल्टेज और चरण वोल्टेज के बीच संबंध होता है

Electrical Engineering · Three-Phase Circuits
Q18
Easy2025✓ Verified

यूनिट आवेग फ़ंक्शन और यूनिट रैंप फ़ंक्शन के बीच क्या संबंध है?

Electrical Engineering · Elementary Signals
Q19
Moderate2025✓ Verified

1 mH और 2 mH के स्व-प्रेरकत्व वाली दो कुंडलियाँ परस्पर जुड़ी हुई हैं। अधिकतम संभव पारस्परिक प्रेरण ___________ है

Electrical Engineering · Magnetic Coupling
Q20
Easy2025✓ Verified

एक कुंडल में प्रतिरोध R और प्रेरकत्व L है। ω = ∞ पर, वोल्टेज और धारा के बीच चरण कोण _____________ है

Electrical Engineering · AC Circuits
Q21
Hard2025✓ Verified

नीचे दिखाए गए सर्किट में, Z-पैरामीटर Z₁₂ खोजें।

Electrical Engineering · Two-Port Networks
Q22
Moderate2025✓ Verified

घूमने वाली विद्युत मशीनरी में विद्युत चुम्बकीय टॉर्क तब मौजूद होता है जब ________

Electrical Engineering · Electromechanical Energy Conversion
Q23
Hard2025✓ Verified

A 400-V, 1000-A, lap wound DC machine has 10 poles, 860 armature conductors. The number of conductors in the pole face to give full compensation if pole face covers 70% of pole span is

Electrical Engineering · DC Machines
Q24
Moderate2025✓ Verified

__________ परीक्षण का उपयोग कर्षण मोटर की दक्षता निर्धारित करने के लिए किया जाता है।

Electrical Engineering · DC Motors
Q25
Easy2025✓ Verified

वायु अंतराल रेखा _________ का प्रतिनिधित्व करती है

Electrical Engineering · DC Machines
Q26
Easy2025✓ Verified

The active power delivered by an alternator will _______ when the prime mover input is increased for the alternator connected to infinite bus bar.

Electrical Engineering · Synchronous Machines
Q27
Moderate2025✓ Verified

एक सिंक्रोनस मशीन में स्टेटर पर फ़ील्ड वाइंडिंग और रोटर पर पॉलीफ़ेज़ आर्मेचर वाइंडिंग होती है। स्थिर अवस्था में, इसके वायु अंतराल क्षेत्र के लिए निम्नलिखित में से कौन सा सत्य नहीं है?

Electrical Engineering · Synchronous Machines
Q28
Moderate2025✓ Verified

इन दिनों अल्टरनेटर को __________ के लिए बड़े वायु अंतराल के लिए डिज़ाइन किया गया है।

Electrical Engineering · Synchronous Machines
Q29
Easy2025✓ Verified

An induction motor can be said analogous to _________

Electrical Engineering · Induction Motors
Q30
Easy2025✓ Verified

While conducting open circuit test and short circuit test on a transformer, status of low voltage and high voltage windings will be such that in ____________

Electrical Engineering · Transformers
Q31
Easy2025✓ Verified

एक 2000/1000/500 तीन वाइंडिंग ट्रांसफार्मर का उपयोग 3000V की आपूर्ति के साथ ऑटो ट्रांसफार्मर के रूप में किया जाना है। 3500 वी पर 1050 केवीए के दो लोड और 1000 वी पर 180 केवीए का दूसरा लोड। आपूर्ति की गई कुल केवीए होगी

Electrical Engineering · Transformers
Q32
Moderate2025✓ Verified

दो एकल चरण ट्रांसफार्मर ए और बी अलग-अलग प्रतिबाधा और समान एक्स/आर अनुपात वाले समानांतर में काम कर रहे हैं। फिर __________

Electrical Engineering · Transformers
Q33
Easy2025✓ Verified

एक वेक्टर को सोलेनॉइडल कहा जाता है जब यह

Electrical Engineering · Vector Calculus
Q34
Moderate2025✓ Verified

A = x i y j z k के लिए स्टोक के प्रमेय का मान ज्ञात कीजिए। समारोह की स्थिति होगी

Electrical Engineering · Vector Calculus
Q35
Moderate2025✓ Verified

शक्ति ज्ञात कीजिए, दी गई ऊर्जा E = 2J और धारा घनत्व J = x2 x = 0 और x = 1 से भिन्न होता है।

Electrical Engineering · Energy and Power
Q36
Moderate2025✓ Verified

Evaluate the surface integral ∫∫ (3x i + 2y j). dS, where S is the sphere given by x² + y² + z² = 9.

Electrical Engineering · Vector Calculus
Q37
Moderate2025✓ Verified

R = 2m पर σ = 5, R = 4m पर σ = − 2 और R = 5m पर σ = − 3 के साथ तीन चार्ज बेलनाकार शीट तीन स्थानों में मौजूद हैं। R = 3m पर फ्लक्स घनत्व ज्ञात कीजिए।

Electrical Engineering · Gauss Law
Q38
Moderate2025✓ Verified

सातत्य समीकरण किन दो नियमों का संयोजन है?

Electrical Engineering · Maxwell Equations
Q39
Easy2025✓ Verified

28C आवेश और 12 mF धारिता वाली धातु की प्लेट की क्षमता की गणना करें।

Electrical Engineering · Electrostatics
Q40
Easy2025✓ Verified

Calculate the emf when the flux is given by 3sin t + 5cos t.

Electrical Engineering · Electromagnetic Induction
Q41
Moderate2025✓ Verified

Find the inductance of a coil with permeability 3.5, turns 100 and length 2m. Assume the area to be thrice the length.

Electrical Engineering · Magnetic Circuits
Q42
Easy2025✓ Verified

Calculate the conduction current density when the resistivity of a material with an electric field of 5 units is 4.5 units.

Electrical Engineering · Conduction and Current Density
Q43
Easy2025✓ Verified

डिजिटल इलेक्ट्रॉनिक्स में एक लॉजिक गेट कई अन्य लॉजिक गेट्स को कब चला सकता है?

Electrical Engineering · Logic Families
Q44
Moderate2025✓ Verified

इनमें से कौन सा त्रुटि-पता लगाने वाला कोड डिजिटल इलेक्ट्रॉनिक उपकरणों में दोहरी त्रुटियां ढूंढने में सक्षम बनाता है?

Electrical Engineering · Digital Codes
Q45
Easy2025✓ Verified

यदि A और B आधे योजक के इनपुट हैं, तो योग __________ द्वारा दिया जाता है

Electrical Engineering · Combinational Logic
Q46
Easy2025✓ Verified

लॉजिक सर्किट की व्यवस्थित कमी _______________ द्वारा पूरी की जाती है

Electrical Engineering · Boolean Algebra
Q47
Easy2025✓ Verified

10 में से 1 बीसीडी डिकोडर के लिए कितने इनपुट की आवश्यकता होती है?

Electrical Engineering · Combinational Logic
Q48
Easy2025✓ Verified

What is the maximum possible range of bit-count specifically in n-bit binary counter consisting of ‘n’ number of flip-flops?

Electrical Engineering · Sequential Logic
Q49
Easy2025✓ Verified

A 12 MHz clock frequency is applied to a cascaded counter containing a modulus-5 counter, a modulus-8 counter and a modulus-10 counter. The lowest output frequency possible is ________

Electrical Engineering · Sequential Logic
Q50
Easy2025✓ Verified

A 4-bit ripple counter consists of flip-flops, where each have a propagation delay from clock to Q output of 15 ns. For the counter to recycle from 1111 to 0000, it takes a total of ________

Electrical Engineering · Sequential Logic
Q51
Moderate2025✓ Verified

एक द्विदिशात्मक 4-बिट शिफ्ट रजिस्टर निबल 1110 को संग्रहीत कर रहा है। इसका इनपुट कम है। निबल 0111 सीरियल डेटा-इनपुट लाइन पर दर्ज होने की प्रतीक्षा कर रहा है। दो क्लॉक पल्स के बाद, शिफ्ट रजिस्टर ________ संग्रहीत कर रहा है

Electrical Engineering · Sequential Logic
Q52
Moderate2025✓ Verified

बिट्स 10110111 के समूह को प्रारंभिक स्थिति 11110000 के साथ 8-बिट समानांतर आउटपुट शिफ्ट रजिस्टर में क्रमिक रूप से (सबसे दाहिनी बिट पहले) स्थानांतरित किया जाता है। दो क्लॉक पल्स के बाद, रजिस्टर में ____________ होता है

Electrical Engineering · Sequential Logic
Q53
Moderate2025✓ Verified

The output frequency related to the sampling interval of a frequency counter as _____________

Electrical Engineering · Digital Measurement
Q54
Easy2025✓ Verified

बाहरी उपकरण के सीरियल प्रारूप के साथ समानांतर डेटा प्रारूप को इंटरफ़ेस करने के लिए किस प्रकार के उपकरण का उपयोग किया जा सकता है?

Electrical Engineering · Data Communication Interfaces
Q55
Easy2025✓ Verified

A 4-bit shift register that receives 4 bits of parallel data will shift to the ________ by ________ position for each clock pulse.

Electrical Engineering · Sequential Logic
Q56
Hard2025✓ Verified

In the case of two-transistor model (T1 & T2) of GTO with anode−short, the anode−short is placed between the

Electrical Engineering · Thyristor Devices
Q57
Hard2025✓ Verified

एक स्टेप-डाउन डेल्टा-स्टार ट्रांसफार्मर, प्रति-चरण 5 टर्न अनुपात के साथ, 3-चरण, 1100 वी, 50 हर्ट्ज स्रोत से खिलाया जाता है। 3-पल्स प्रकार के रेक्टिफायर के माध्यम से इस ट्रांसफार्मर का सेकेंडरी 10 Ω का आर लोड फ़ीड करता है। लोड धारा (चरण) का अधिकतम मान ज्ञात कीजिए।

Electrical Engineering · Rectifiers
Q58
Moderate2025✓ Verified

In non-circulating current mode dual converters, the circulating current is avoided by

Electrical Engineering · Converters
Q59
Easy2025✓ Verified

एकल-पल्स चौड़ाई मॉड्यूलेशन विधि में, आउटपुट वोल्टेज तरंग नकारात्मक आधे चक्र में ____________ के बारे में सममित है।

Electrical Engineering · Inverters
Q60
Moderate2025✓ Verified

In the case of a single−pulse width modulation with the pulse width = 2d, to eliminate the nth harmonic from the output voltage

Electrical Engineering · Inverters
Q61
Easy2025✓ Verified

AC वोल्टेज नियंत्रकों का उपयोग __________ अनुप्रयोगों में किया जाता है।

Electrical Engineering · AC Voltage Controllers
Q62
Moderate2025✓ Verified

In a N-stage sequence controller, each secondary is rated for __________

Electrical Engineering · High Voltage Generation
Q64
Easy2025✓ Verified

Two six pulse converters used for bipolar HVDC transmission system are rated at 1000 MW, ± 200 kV. What is the DC transmission voltage?

Electrical Engineering · HVDC Transmission
Q65
Easy2025✓ Verified

A single−phase AC switch is used in between a 230 V source and load of 2 kW and 0.8 lagging power factor. Determine the rms current rating required by the SCR. Use the factor of safety = 2.

Electrical Engineering · AC Controllers
Q66
Moderate2025✓ Verified

Choose the incorrect statement.

Electrical Engineering · Switched Mode Power Supplies
Q67
Moderate2025✓ Verified

Which of the following signals is monotonic?

Electrical Engineering · Signal Classification
Q68
Easy2025✓ Verified

x(t) को गैर-आवधिक संकेत कब कहा जाता है?

Electrical Engineering · Signal Classification
Q69
Easy2025✓ Verified

Determine the discrete−time signal: x(n) = 1 for n ≥ 0 and x(n) = 0 for n < 0.

Electrical Engineering · Discrete-Time Signals
Q70
Moderate2025✓ Verified

k के किन मानों के लिए निम्नलिखित प्रणाली स्थिर है, y = (k² − 3k − 4)log(x) syn(x)?

Electrical Engineering · Systems
Q71
Hard2025✓ Verified

A 440 V, 50 Hz AC source supplies a series LCR circuit with a capacitor and a coil. If the coil has 100 mΩ resistance and 15 mH inductance, then at a resonance frequency of 50 Hz, the half power frequencies of the circuit are ______________

Electrical Engineering · RLC Circuits
Q72
Hard2025✓ Verified

एक सिग्नल e^(−at) syn (ωt) एक वास्तविक रैखिक समय अपरिवर्तनीय प्रणाली का इनपुट है। दिया गया K और ∅ स्थिरांक हैं, सिस्टम का आउटपुट Ke^(−bt) syn (vt ∅) के रूप में होगा। निम्नलिखित में से सही कथन __________ है

Electrical Engineering · LTI Systems
Q73
Moderate2025✓ Verified

एक आवधिक वर्ग तरंग -1 से 1 और अवधि = 2 इकाइयों तक के आयताकार दालों द्वारा बनाई जाती है। इस तरंगरूप के लिए 7वें हार्मोनिक में शक्ति और 5वें हार्मोनिक में शक्ति का अनुपात ____________ के बराबर है

Electrical Engineering · Fourier Series
Q74
Moderate2025✓ Verified

फूरियर अभिसरण प्रमेय कब लागू होता है?

Electrical Engineering · Fourier Series
Q75
Easy2025✓ Verified

Which of the following waves has the highest value of peak factor?

Electrical Engineering · Waveform Parameters
Q76
Easy2025✓ Verified

एक आगमनात्मक सर्किट का समय स्थिरांक

Electrical Engineering · First-Order Circuits
Q77
Moderate2025✓ Verified

एक एलटीआई प्रणाली की आवेग प्रतिक्रिया जो निरंतर है H (t) = e−|t| प्रणाली ___________ है

Electrical Engineering · LTI Systems
Q78
Moderate2025✓ Verified

Form factor is equal to peak factor in the case of

Electrical Engineering · Waveform Parameters
Q79
Hard2025✓ Verified

Which of the following reactances is eliminated first in synchronous generator just after the symmetrical fault?

Electrical Engineering · Fault Analysis
Q80
Hard2025✓ Verified

A transmission line Z = (2 + j8) Ω has 10% of the voltage regulation with the lagging load of 0.8. If the load is 0.707 leading, then the V.R. is ________ (Assume the current is same in both cases)

Electrical Engineering · Transmission Lines
Q81
Easy2025✓ Verified

एक खुला पाइप 500 हर्ट्ज आवृत्ति के ट्यूनिंग कांटा के साथ प्रतिध्वनित होता है। यह देखा गया है कि खुले सिरे से 16 सेमी और 46 सेमी की दूरी पर दो क्रमिक नोड बनते हैं। पाइप में हवा में ध्वनि की गति है

Electrical Engineering · Waves and Acoustics
Q82
Hard2025✓ Verified

400/33000 V के लाइन वोल्टेज अनुपात वाला एक तीन-चरण ट्रांसफार्मर स्टार-डेल्टा में जुड़ा हुआ है। 400V की ओर के CT का CT अनुपात 1000/5 है। 33000 पक्ष पर सीटी का अनुपात क्या होना चाहिए?

Electrical Engineering · Protection
Q83
Hard2025✓ Verified

तीन चरण 20 एमवीए, 11 केवी अल्टरनेटर के न्यूट्रल को 5 ओम के प्रतिरोध के माध्यम से अर्थ किया जाता है। जब 1.5 ए का करंट असंतुलित हो तो रिले को संचालित करने के लिए सेट किया जाता है। सीटी का अनुपात 100/5 होता है। 90% वाइंडिंग की सुरक्षा के लिए अर्थिंग प्रतिरोध का न्यूनतम मान क्या होना चाहिए?

Electrical Engineering · Protection
Q84
Moderate2025✓ Verified

A single−phase motor is connected to 400V, 50Hz supply. The motor draws a current of 31.7A at a power factor 0.7 lag. The additional reactive power (in VAR) to be supplied by the capacitor bank will be ___________

Electrical Engineering · Power Factor Correction
Q85
Moderate2025✓ Verified

एक पृथक जनरेटर 20 मेगावाट, 50 हर्ट्ज की निरंतर अधिकतम शक्ति के साथ एक टरबाइन से जुड़ा हुआ है। जेनरेटर 8 मेगावाट के दो लोड से जुड़ा है, प्रत्येक 50 हर्ट्ज पर संचालित होता है। जेनरेटर में 5% ड्रॉप विशेषता है। यदि 6 मेगावाट का अतिरिक्त भार जोड़ा जाता है, तो आवृत्ति ___________ होगी

Electrical Engineering · Load Frequency Control
Q86
Hard2025✓ Verified

यदि किसी विद्युत प्रणाली में दोष बिंदु पर सभी अनुक्रम वोल्टेज समान हैं, तो दोष __________ है

Electrical Engineering · Fault Analysis
Q87
Moderate2025✓ Verified

The characteristic equation of a control system is given by s(s + 4)(s² + 2s + s) + k(s + 1) = 0. What are the angles of the asymptotes for the root loci?

Electrical Engineering · Root Locus
Q88
Hard2025✓ Verified

दूसरे क्रम प्रणाली की इकाई चरण प्रतिक्रिया = 1 − e^(−5t) − 5t e^(−5t) है। निम्नलिखित कथनों पर विचार करें:1.कम नम प्राकृतिक आवृत्ति 5 रेड/सेकेंड है।2.अवमंदन अनुपात है1.3.आवेग प्रतिक्रिया 25t e^(−5t) है।ऊपर दिए गए कथनों में से कौन सा सही है?

Electrical Engineering · Second-Order Systems
Q89
Moderate2025✓ Verified

दावा (ए): एक पीआई नियंत्रक इकाइयों द्वारा सिस्टम के क्रम को बढ़ाता है लेकिन स्थिर स्थिति त्रुटि को कम करता है।कारण (आर): एक पीआई नियंत्रक या तो मूल बिंदु पर या नकारात्मक वास्तविक अक्ष पर वांछित बिंदु पर एक ध्रुव प्रस्तुत करता है।

Electrical Engineering · Controllers
Q90
Moderate2025✓ Verified

Assertion (A): Routh criterion is in terms of array formulation which is more convenient to handle.Reason (R): This method is used to investigate the method of stability of higher order systems.

Electrical Engineering · Stability
Q91
Easy2025✓ Verified

The auto-correlation function of a rectangular pulse of duration T is

Electrical Engineering · Signals and Systems
Q92
Moderate2025✓ Verified

The method of investigating the stability using Liapunov function is _____________

Electrical Engineering · Nonlinear Control
Q93
Easy2025✓ Verified

For a unity feedback system, the open loop transfer function is G(s) = K(s + 2)/s² (s² + 7s + 12). What is the type of system?

Electrical Engineering · Steady-State Error
Q94
Hard2025✓ Verified

What is the response of the feedback function with open loop transfer function G(s) = 4/s(s + 5) and input is input step?

Electrical Engineering · Time Response
Q95
Hard2025✓ Verified

The open loop transfer function for a unit feedback system is G(s) = K/s(sT + 1). By what factor the amplitude gain K should be reduced so that the peak overshoot becomes 25% from 75%?

Electrical Engineering · Transient Response
Q96
Easy2025✓ Verified

What is the need for a controller?

Electrical Engineering · Controllers
Q98
Easy2025✓ Verified

DAA instruction is used to perform which type of addition?

Electrical Engineering · 8085 Microprocessor
Q100
Moderate2025✓ Verified

यदि पिन एसटीबी (स्ट्रोब इनपुट) का मान निम्न स्तर तक गिर जाता है

Electrical Engineering · 8255 PPI
Q101
Easy2025✓ Verified

जब एक स्टैक सेगमेंट प्रारंभ किया जाता है, तब

Electrical Engineering · 8086 Microprocessor
Q102
Moderate2025✓ Verified

मोड 2 में, यदि एन को गिनती मूल्य के रूप में लोड किया जाता है, तो (एन - 1) चक्र के बाद, आउटपुट कम हो जाता है

Electrical Engineering · 8253/8254 Timer
Q103
Moderate2025✓ Verified

यदि शून्य शर्त संतुष्ट है, तो निष्पादन के लिए, जेएनजेड निर्देश लिया जाता है

Electrical Engineering · Microprocessor Instructions
Q104
Easy2025✓ Verified

वह पिन जो सेट होने पर कमांड, अनुरोध और अस्थायी रजिस्टरों और आंतरिक प्रथम/अंतिम फ्लिपफ्लॉप को साफ़ करता है

Electrical Engineering · DMA Controller
Q105
Easy2025✓ Verified

संपूर्ण सॉफ्टवेयर सिस्टम को विभाजित किया गया है

Electrical Engineering · Real-Time Software
Q106
Moderate2025✓ Verified

The highest priority usage than any other usage is

Electrical Engineering · 8086/80286 Bus
Q107
Hard2025✓ Verified

वैध होल्ड अनुरोध पूरा होने के बाद ही सुनिश्चित किया जाता है

Electrical Engineering · 80286 Microprocessor
Q108
Hard2025✓ Verified

The number of idle states (Ti), that is allowed between two INTA cycles, to meet the 8259A speed and cascade address output delay is

Electrical Engineering · 8259A PIC
Q109
Moderate2025✓ Verified

एचवीडीसी एलसीसी में ______________ होते हैं

Electrical Engineering · HVDC Transmission
Q110
Easy2025✓ Verified

कुशल LCC HVDC कन्वर्टर्स आम तौर पर __________ का उपयोग करते हैं

Electrical Engineering · HVDC Transmission
Q111
Easy2025✓ Verified

उच्च वोल्टेज केबलों में आमतौर पर किस इन्सुलेशन सामग्री का उपयोग किया जाता है?

Electrical Engineering · High Voltage Engineering
Q112
Hard2025✓ Verified

वोल्टेज मल्टीप्लायर सर्किट में उच्च स्तर पर शिथिलता को कैसे कम किया जा सकता है?

Electrical Engineering · High Voltage Engineering
Q113
Moderate2025✓ Verified

__________ is the normal length of the cable sample used for testing.

Electrical Engineering · High Voltage Engineering
Q114
Easy2025✓ Verified

__________ finds the deterioration or failure due to internal discharges caused in the insulation of bushing.

Electrical Engineering · High Voltage Engineering
Q116
Moderate2025✓ Verified

A physical system of electromechanical energy conversion consists of a stationary part creating a magnetic field with electric energy input, and a moving part giving mechanical energy output. If the movable part is kept fixed, the entire electrical energy input will be _______

Electrical Engineering · Electromechanical Energy Conversion
Q117
Easy2025✓ Verified

निम्नलिखित में से किसकी परिचालन लागत सबसे अधिक है?

Electrical Engineering · Power Plant Economics
Q118
Easy2025✓ Verified

निम्नलिखित में से कौन सा वार्षिक औसत भार दर्शाता है?

Electrical Engineering · Load Curves and Tariffs
Q119
Easy2025✓ Verified

निम्नलिखित में से किसे शीत आरक्षित कहा जाता है?

Electrical Engineering · Power System Operation
Q120
Easy2025✓ Verified

जब किसी पिंड का संवेग दोगुना हो जाता है, तो उसकी गतिज ऊर्जा ___________ होती है

Electrical Engineering · Engineering Mechanics
Q121
Easy2025✓ Verified

In a thermal power station, coal is used for the generation of electricity. How energy changes from one form to another before it is transformed into electrical energy?

Electrical Engineering · Thermal Power Plants
Q122
Easy2025✓ Verified

भाप विद्युत संयंत्र में बॉयलर का प्राथमिक कार्य क्या है?

Electrical Engineering · Steam Power Plants
Q123
Easy2025✓ Verified

भाप विद्युत संयंत्र में कंडेनसर का उद्देश्य क्या है?

Electrical Engineering · Steam Power Plants
Q124
Easy2025✓ Verified

निम्नलिखित में से कौन सा भाप बिजली संयंत्र में उपयोग किया जाने वाला ईंधन का प्रकार नहीं है?

Electrical Engineering · Steam Power Plants
Q126
Easy2025✓ Verified

What is the function of a cooling tower in a steam power plant?

Electrical Engineering · Steam Power Plants
Q127
Easy2025✓ Verified

एक नई नवीकरणीय ऊर्जा प्रणाली पवन से ऊर्जा प्राप्त करने के लिए डिज़ाइन की गई है। सिस्टम को बनाने के लिए आवश्यक कुल ऊर्जा 240 kJ है। सिस्टम का ऊर्जा उपज अनुपात 14:3 है। अपने जीवनकाल में सिस्टम द्वारा प्रदान की गई कुल ऊर्जा क्या होगी?

Electrical Engineering · Renewable Energy
Q128
Easy2025✓ Verified

Which of the following is the 7th goal of the eight millennium goals of United Nations?

Electrical Engineering · Sustainable Development
Q129
Easy2025✓ Verified

What is the aim of Paris Agreement in 2015? (Note : C indicates Celsius)

Electrical Engineering · Climate Policy
Q130
Easy2025✓ Verified

भारतीय परिवहन क्षेत्र में ऊर्जा की खपत किस पर निर्भर करती है?

Electrical Engineering · Transport Energy
Q131
Easy2025✓ Verified

What is Sun’s declination angle during summer solstice?

Electrical Engineering · Solar Energy
Q132
Easy2025✓ Verified

What does the term “Quality Control” mean in the context of Industrial Engineering and Management?

Electrical Engineering · Quality Management
Q133
Easy2025✓ Verified

The primary objective of the __________ is to consolidate the laws relating to the generation, transmission, distribution, trading and use of electricity in India.

Electrical Engineering · Electricity Legislation
Q134
Easy2025✓ Verified

अर्थिंग के लिए भारतीय मानक अभ्यास संहिता __________ में निर्दिष्ट है।

Electrical Engineering · Indian Standards
Q135
Easy2025✓ Verified

The policy specifically addressing power generation from municipal solid waste in Gujarat is the __________.

Electrical Engineering · Renewable Energy Policy
Q136
Easy2025✓ Verified

__________ भारत में ऊर्जा के कुशल उपयोग और इसके संरक्षण के लिए प्रावधान करता है।

Electrical Engineering · Energy Legislation
Q137
Easy2025✓ Verified

भारतीय मानक, IS 732 __________ के लिए अभ्यास संहिता प्रदान करता है।

Electrical Engineering · Indian Standards
Q138
Easy2025✓ Verified

A key function of an Electricity Regulatory Commission is the determination of __________.

Electrical Engineering · Electricity Regulation
Q139
Easy2025✓ Verified

गुजरात पवन ऊर्जा नीति वर्ष __________ में स्थापित की गई थी।

Electrical Engineering · Renewable Energy Policy
Q140
Easy2025✓ Verified

सूची में उल्लिखित गुजरात सौर ऊर्जा नीति __________ में जारी की गई थी।

Electrical Engineering · Renewable Energy Policy
Q141
Easy2025✓ Verified

पवन सौर हाइब्रिड पावर नीति का प्राथमिक लक्ष्य __________ है।

Electrical Engineering · Renewable Energy Policy
Q142
Easy2025✓ Verified

The Gujarat Electricity Industry (Reorganization & Regulation) Act was enacted in the year __________.

Electrical Engineering · Electricity Legislation
Q143
Easy2025✓ Verified

उपकरणों के लिए स्टार लेबलिंग कार्यक्रम, जो ऊर्जा दक्षता का संकेत देता है, __________ के तहत एक महत्वपूर्ण पहल है।

Electrical Engineering · Energy Efficiency
Q144
Easy2025✓ Verified

The Gujarat Small Hydel Policy of 2016 typically applies to hydroelectric projects with a station capacity upto __________.

Electrical Engineering · Renewable Energy Policy
Q145
Moderate2025✓ Verified

IS 3043 के अनुसार, एक बड़े पावर स्टेशन के लिए अर्थ कनेक्शन का प्रतिरोध जितना संभव हो उतना कम होना चाहिए, आदर्श रूप से __________ से अधिक नहीं होना चाहिए।

Electrical Engineering · Indian Standards
Q146
Easy2025✓ Verified

विद्युत अपीलीय न्यायाधिकरण (एपीटीईएल) की स्थापना __________ द्वारा अनिवार्य की गई थी।

Electrical Engineering · Electricity Legislation
Q147
Easy2025✓ Verified

As per IS 732, the colour code for the earth wire in a flexible cable is __________.

Electrical Engineering · Indian Standards
Q148
Easy2025✓ Verified

The Gujarat Renewable Energy Policy of 2023 was introduced to supersede previous policies and attract __________ in the RE sector.

Electrical Engineering · Renewable Energy Policy
Q149
Easy2025✓ Verified

1956 के भारतीय विद्युत नियम काफी हद तक बिजली क्षेत्र में __________ सुनिश्चित करने पर केंद्रित थे।

Electrical Engineering · Electricity Legislation
Q150
Easy2025✓ Verified

नई व्यावसायिक इमारतों के लिए ऊर्जा प्रदर्शन मानक निर्धारित करने के लिए ऊर्जा संरक्षण भवन कोड (ECBC) __________ द्वारा लॉन्च किया गया था।

Electrical Engineering · Energy Efficiency
Q151
Easy2025✓ Verified

The Gujarat Wind Power Policy of 2016 included provisions for the 'repowering' of older, less efficient __________.

Electrical Engineering · Renewable Energy Policy
Q152
Easy2025✓ Verified

The primary purpose of equipment earthing as per IS 3043 is to __________.

Electrical Engineering · Earthing and Safety
Q153
Easy2025✓ Verified

गुजरात सौर ऊर्जा नीति, 2021 की अवधि __________ है।

Electrical Engineering · Renewable Energy Policy
Q154
Easy2025✓ Verified

The policy that allows for setting up wind and solar projects at the same location to save land and transmission infrastructure is the __________.

Electrical Engineering · Renewable Energy Policy
Q155
Moderate2025✓ Verified

IS 732 के अनुसार, किसी इंस्टॉलेशन में लीकेज करंट पूर्ण लोड करंट के __________ से अधिक नहीं होना चाहिए।

Electrical Engineering · Indian Standards
Q156
Easy2025✓ Verified

The creation of a National Load Despatch Centre and Regional Load Despatch Centres is mandated by the __________.

Electrical Engineering · Electricity Legislation
Q157
Easy2025✓ Verified

The main objective of the Gujarat Electricity Industry (Reorganization & Regulation) Act, 2003 was aligned with the national policy of __________.

Electrical Engineering · Electricity Legislation
Q158
Moderate2025✓ Verified

'परफॉर्म, अचीव एंड ट्रेड' (PAT) योजना बड़े उद्योगों में ऊर्जा दक्षता में सुधार के लिए एक बाजार-आधारित तंत्र है और __________ का एक हिस्सा है।

Electrical Engineering · Energy Efficiency
Q159
Easy2025✓ Verified

The Gujarat Energy Development Agency (GEDA) is primarily focused on __________.

Electrical Engineering · Renewable Energy Institutions
Q160
Easy2025✓ Verified

इलेक्ट्रोमैकेनिकल लिफ्ट प्रणाली में, गवर्नर का प्राथमिक कार्य क्या है?

Electrical Engineering · Vertical Transportation
Q161
Easy2025✓ Verified

What is the typical angle of inclination for a commercial escalator as per general safety standards?

Electrical Engineering · Vertical Transportation
Q162
Easy2025✓ Verified

सेंट्रल एयर कंडीशनिंग सिस्टम में कौन सा घटक रेफ्रिजरेंट से गर्मी हटाने के लिए जिम्मेदार है?

Electrical Engineering · HVAC
Q163
Easy2025✓ Verified

एनबीसी 2016 के अनुसार, निम्नलिखित में से किसे एक आवश्यक भार माना जाता है जिसे आपातकालीन बिजली प्रणाली से जोड़ा जाना चाहिए?

Electrical Engineering · Building Safety
Q164
Easy2025✓ Verified

The 'cone of protection' method, specified in lightning protection standards, is used to determine the area protected by a

Electrical Engineering · Lightning Protection
Q165
Easy2025✓ Verified

किसी व्यावसायिक भवन में डीजल जेनरेटर (डीजी) सेट का मुख्य उद्देश्य क्या है?

Electrical Engineering · Standby Power
Q166
Easy2025✓ Verified

विद्युत प्रणाली में आरसीसीबी (अवशिष्ट धारा सर्किट ब्रेकर) का प्राथमिक कार्य क्या है?

Electrical Engineering · Electrical Protection
Q167
Easy2025✓ Verified

Which system is considered the central 'brain' for controlling and monitoring a building's mechanical and electrical equipment such as ventilation, lighting and power systems?

Electrical Engineering · Building Automation
Q168
Easy2025✓ Verified

निम्नलिखित में से क्या आमतौर पर किसी भवन के ऑडियो-वीडियो (एवी) सिस्टम द्वारा नियंत्रित नहीं किया जाता है?

Electrical Engineering · ELV Systems
Q169
Easy2025✓ Verified

कंप्यूटर नेटवर्किंग में, किस टोपोलॉजी में सभी उपकरणों को गोलाकार तरीके से जोड़ना शामिल है?

Electrical Engineering · Computer Networking
Q170
Moderate2025✓ Verified

भारत के राष्ट्रीय विद्युत संहिता (एनईसी), 2023 में पेश किया गया फोकस का प्रमुख क्षेत्र क्या है?

Electrical Engineering · Electrical Codes
Q171
Easy2025✓ Verified

What is the main function of a Manual Call Point (MCP) in a fire alarm system?

Electrical Engineering · Fire Alarm Systems
Q172
Easy2025✓ Verified

Which lamp technology is currently the most energy-efficient and widely adopted for new street lighting projects?

Electrical Engineering · Lighting
Q173
Easy2025✓ Verified

In street lighting, the term 'luminaire' refers to

Electrical Engineering · Lighting
Q174
Easy2025✓ Verified

ऊंची इमारतों की जल आपूर्ति प्रणालियों में पानी का दबाव बढ़ाने के लिए किस प्रकार के पंप का सबसे अधिक उपयोग किया जाता है?

Electrical Engineering · Water Supply Systems
Q175
Easy2025✓ Verified

किसी पंप का 'कुल हेड' क्या दर्शाता है?

Electrical Engineering · Pumps
Q176
Moderate2025✓ Verified

गैलियम नाइट्राइड (GaN) जैसे वाइड-बैंडगैप (WBG) सेमीकंडक्टर मुख्य रूप से पावर इलेक्ट्रॉनिक्स में लोकप्रिय हो रहे हैं क्योंकि वे _________ प्रदान करते हैं

Electrical Engineering · Semiconductor Devices
Q177
Easy2025✓ Verified

मोबाइल उपकरणों के लिए अधिकांश सामान्य वायरलेस चार्जिंग पैड के संचालन का सिद्धांत पर आधारित है

Electrical Engineering · Emerging Electrical Technologies
Q178
Easy2025✓ Verified

ट्रैक्शन लिफ्ट में, काउंटरवेट का क्या कार्य है?

Electrical Engineering · Vertical Transportation
Q179
Easy2025✓ Verified

एचवीएसी में एक वेरिएबल एयर वॉल्यूम (वीएवी) प्रणाली को डिज़ाइन किया गया है

Electrical Engineering · HVAC
Q180
Moderate2025✓ Verified

0.9 पावर फैक्टर पर 10 किलोवाट की इनपुट शक्ति के साथ एक संतुलित तीन चरण, तीन तार प्रणाली के लिए, दोनों वाटमीटर पर रीडिंग क्रमशः _________ हैं

Electrical Engineering · Three-Phase Circuits
स्मार्ट अगला कदम

अब आगे क्या करें

आपकी वास्तविक PYQ गतिविधि से सरल अगला कदम। कोई छिपी हुई स्कोर भविष्यवाणी नहीं।

महत्वपूर्ण सत्यापित PYQगैलियम नाइट्राइड (GaN) जैसे वाइड-बैंडगैप (WBG) सेमीकंडक्टर मुख्य रूप से पावर इलेक्ट्रॉनिक्स में लोकप्रिय हो रहे…Assistant Engineer (Electrical), Class-2, Road and Building Department 2025महत्वपूर्ण सत्यापित PYQभारत के राष्ट्रीय विद्युत संहिता (एनईसी), 2023 में पेश किया गया फोकस का प्रमुख क्षेत्र क्या…Assistant Engineer (Electrical), Class-2, Road and Building Department 2025महत्वपूर्ण सत्यापित PYQविद्युत प्रणाली में आरसीसीबी (अवशिष्ट धारा सर्किट ब्रेकर) का प्राथमिक कार्य क्या है?Assistant Engineer (Electrical), Class-2, Road and Building Department 2025महत्वपूर्ण सत्यापित PYQएनबीसी 2016 के अनुसार, निम्नलिखित में से किसे एक आवश्यक भार माना जाता है जिसे आपातकालीन…Assistant Engineer (Electrical), Class-2, Road and Building Department 2025