લાઇવ MCQ પ્રેક્ટિસ મદદનીશ ઈજનેર (ઈલેક્ટ્રીકલ), વર્ગ-2, માર્ગ Master Question Paper (BPB) - Technical Section (Series M) 180 MCQs · એક વિકલ્પ પસંદ કરો
0 / 180 જવાબ આપ્યા 0 સાચા 0 ખોટા
Sign in હોય તો progress તમારા SRO profileમાં સેવ થાય છે.
નીચેનામાંથી કયું AC સર્કિટમાં પીક વેલ્યુની સાચી રજૂઆત છે?
A RMS મૂલ્ય/પીક પરિબળ
B RMS મૂલ્ય*ફોર્મ પરિબળ
C RMS મૂલ્ય/ફોર્મ પરિબળ
D RMS મૂલ્ય*પીક પરિબળ
આગળનો MCQ ↓ Electrical Engineering · AC Fundamentals
What is the direction of the electric field at a point?
A Along the line perpendicular to the electric field
B Along the line tangent to the electric field
C Electric field has no direction
D Electric field has a random direction
આગળનો MCQ ↓ Electrical Engineering · Electric Field
What is the number of primary turns in a 200/1000V transformer if the emf per turn is 10V?
A 5
B 10
C 20
D 40
આગળનો MCQ ↓ Electrical Engineering · Transformers
કેટલા ઈલેક્ટ્રોન 2 કૂલમ્બ ઈલેક્ટ્રિક ચાર્જ બનાવશે?
A 6.24 × 10¹⁸ ઇલેક્ટ્રોન
B 12.48 × 10¹⁸ ઇલેક્ટ્રોન
C 1.602 × 10¹⁹ ઇલેક્ટ્રોન
D 3.204 × 10¹⁹ ઇલેક્ટ્રોન
આગળનો MCQ ↓ Electrical Engineering · Electric Charge
How does induced emf in DC motor react to supply voltage?
A It will aid the supply voltage
B It will be double the supply voltage
C It will oppose the supply voltage
D It will be half of the supply voltage
આગળનો MCQ ↓ Electrical Engineering · DC Machines
How many cycles will an AC signal make in 2 seconds if its frequency is 100Hz?
A 50
B 100
C 150
D 200
આગળનો MCQ ↓ Electrical Engineering · AC Fundamentals
What will be the current density of a metal if a current of 30A is passed through a cross-sectional area of 0.5m2?
A 7.5 A/m2
B 15 A/m2
C 60 A/m2
D 120 A/m2
આગળનો MCQ ↓ Electrical Engineering · Current and Current Density
જે પદાર્થની સાપેક્ષ અભેદ્યતા ખાલી જગ્યાની અભેદ્યતા કરતાં ઓછી હોય છે તે _____________ છે.
A ડાયમેગ્નેટિક
B પેરામેગ્નેટિક
C ફેરોમેગ્નેટિક
D ચુંબકીય પદાર્થ નથી
આગળનો MCQ ↓ Electrical Engineering · Magnetic Materials
Diamagnetic substances have relative permeability _____________.
A Greater than 1
B Less than 1
C Equal to 1
D Zero
આગળનો MCQ ↓ Electrical Engineering · Magnetic Materials
જ્યારે ચુંબકીય પ્રવાહ ઘટે છે ત્યારે MMFનું શું થાય છે?
A વધે છે
B ઘટે છે
C સતત રહે છે
D શૂન્ય બની જાય છે
આગળનો MCQ ↓ Electrical Engineering · Magnetic Circuits
Can we apply Kirchhoff’s law to magnetic circuits?
A Yes
B No
C Depends on the circuit
D Insufficient information provided
આગળનો MCQ ↓ Electrical Engineering · Magnetic Circuits
કેસીએલ એ હકીકત પર આધારિત છે
A ઊર્જા સંગ્રહિત કરવા માટે નોડની શક્યતા છે
B નોડ પર ચાર્જનું સંચય થઈ શકતું નથી
C નોડ પર ચાર્જ સંચય શક્ય છે
D ચાર્જ સંચય શક્ય છે અથવા ન પણ હોઈ શકે
આગળનો MCQ ↓ Electrical Engineering · Kirchhoff's Laws
Power dissipation in ideal inductor is
A Maximum
B Minimum
C Zero
D Finite value
આગળનો MCQ ↓ Electrical Engineering · AC Circuits
વિશાળ બેન્ડવિડ્થ મેળવવા માટે, નીચેનામાંથી કઈ સાથે નેટવર્ક ડિઝાઇન કરવામાં આવે છે?
A ઉચ્ચ ક્યૂ પરિબળ
B નિમ્ન ક્યૂ પરિબળ
C યુનિટી ક્યૂ પરિબળ
D શૂન્ય ક્યૂ પરિબળ
આગળનો MCQ ↓ Electrical Engineering · Resonance
V_AB શોધો જો i_AB = 5 A.
A 32.76V
B 35.56V
C 36.12V
D 34.21 વી
આગળનો MCQ ↓ Electrical Engineering · Resistive Networks
Q16
Moderate 2025 ✓ ચકાસેલ
↗
જો મેશ-કરન્ટ પદ્ધતિ દ્વારા સર્કિટનું વર્ણન કરવા માટે 4 સમીકરણો જરૂરી હોય અને ત્યાં n નોડ્સ હોય, તો નેટવર્કમાં કેટલી શાખાઓ છે?
A n 5
B n 3
C n
D n − 1
આગળનો MCQ ↓ Electrical Engineering · Graph Theory
ડેલ્ટા-કનેક્ટેડ લોડમાં, લાઇન વોલ્ટેજ અને તબક્કા વોલ્ટેજ વચ્ચેનો સંબંધ છે
A રેખા વોલ્ટેજ
B રેખા વોલ્ટેજ
C line voltage = તબક્કો વોલ્ટેજ
D રેખા વોલ્ટેજ
આગળનો MCQ ↓ Electrical Engineering · Three-Phase Circuits
યુનિટ ઇમ્પલ્સ ફંક્શન અને યુનિટ રેમ્પ ફંક્શન વચ્ચે શું સંબંધ છે?
A r = dd(t)/dt
B d = dr/dt
C δ(t) = d²r(t)/dt²
D r = d2(d)/dt2
આગળનો MCQ ↓ Electrical Engineering · Elementary Signals
Q19
Moderate 2025 ✓ ચકાસેલ
↗
Two coils having self-inductances of 1 mH and 2 mH are mutually coupled. The maximum possible mutual inductance is ___________
A 1.414 mH
B 2 mH
C 1 mH
D 5.5 mH
આગળનો MCQ ↓ Electrical Engineering · Magnetic Coupling
કોઇલમાં પ્રતિકાર R અને ઇન્ડક્ટન્સ L હોય છે. ω = ∞ પર, વોલ્ટેજ અને વર્તમાન વચ્ચેનો તબક્કો કોણ _____________ છે
A 0°
B 180°
C 45°
D 90°
આગળનો MCQ ↓ Electrical Engineering · AC Circuits
નીચે બતાવેલ સર્કિટમાં, Z-પેરામીટર Z₁₂ શોધો.
A 15
B 10
C 5
D 1
આગળનો MCQ ↓ Electrical Engineering · Two-Port Networks
Q22
Moderate 2025 ✓ ચકાસેલ
↗
Electromagnetic torque in rotating electrical machinery is present when ________
A Both stator and rotor windings carry current
B Air gap is uniform
C Stator winding alone carries current
D Rotor winding alone carries current
આગળનો MCQ ↓ Electrical Engineering · Electromechanical Energy Conversion
400-V, 1000-A, લેપ ઘા ડીસી મશીનમાં 10 ધ્રુવો, 860 આર્મેચર કંડક્ટર છે. જો પોલ ફેસ પોલ સ્પેનના 70% ભાગને આવરી લે તો સંપૂર્ણ વળતર આપવા માટે પોલ ફેસમાં કંડક્ટરની સંખ્યા છે
A 3010
B 4300
C 2400
D 2800
આગળનો MCQ ↓ Electrical Engineering · DC Machines
Q24
Moderate 2025 ✓ ચકાસેલ
↗
_________ ટેસ્ટનો ઉપયોગ ટ્રેક્શન મોટરની કાર્યક્ષમતા નક્કી કરવા માટે થાય છે.
A હોપકિન્સન
B મંદતા
C ક્ષેત્ર
D સ્વિનબર્ન
આગળનો MCQ ↓ Electrical Engineering · DC Motors
એર ગેપ લાઇન _________ રજૂ કરે છે
A ડીસી મશીનના એર ગેપનું ચુંબકીય વર્તન
B ઇન્ડક્શન મશીનના એર ગેપનું ચુંબકીય વર્તન
C આયર્ન કોરનું ચુંબકીય વર્તન
D ઉલ્લેખિત તમામ
આગળનો MCQ ↓ Electrical Engineering · DC Machines
જ્યારે અનંત બસ બાર સાથે જોડાયેલા અલ્ટરનેટર માટે પ્રાઇમ મૂવર ઇનપુટ વધારવામાં આવે ત્યારે અલ્ટરનેટર દ્વારા વિતરિત સક્રિય શક્તિ _______ થશે.
A સતત રહો
B ઘટાડો
C વધારો
D પાવર અને પ્રાઇમ મૂવર ડ્રોપ લાક્ષણિકતા વચ્ચે કોઈ સંબંધ નથી
આગળનો MCQ ↓ Electrical Engineering · Synchronous Machines
Q27
Moderate 2025 ✓ ચકાસેલ
↗
સિંક્રનસ મશીનમાં સ્ટેટર પર ફીલ્ડ વિન્ડિંગ અને રોટર પર પોલીફેસ આર્મેચર વિન્ડિંગ હોય છે. સ્થિર સ્થિતિમાં, નીચેનામાંથી કયું તેના એર ગેપ ક્ષેત્ર માટે સાચું નથી?
A સ્થિર w.r.t. સ્ટેટર
B Ns w.r.t થી બમણી ઝડપે ફરવું રોટર
C રોટરની વિરુદ્ધ દિશામાં ફરવું
D Ns w.r.t. પર ફરતી રોટર
આગળનો MCQ ↓ Electrical Engineering · Synchronous Machines
Q28
Moderate 2025 ✓ ચકાસેલ
↗
આ દિવસોમાં ઓલ્ટરનેટર્સ __________ માટે મોટા હવાના અંતર માટે રચાયેલ છે.
A સ્થિર સમાંતર કામગીરી
B ઉચ્ચ સ્થિરતા મર્યાદા
C સિનુસોઇડલ એમએમએફ વિતરણ
D ઉલ્લેખિત તમામ
આગળનો MCQ ↓ Electrical Engineering · Synchronous Machines
An induction motor can be said analogous to _________
A Synchronous motor
B Transformer
C Universal motor
D Stepper motor
આગળનો MCQ ↓ Electrical Engineering · Induction Motors
ટ્રાન્સફોર્મર પર ઓપન સર્કિટ ટેસ્ટ અને શોર્ટ સર્કિટ ટેસ્ટ કરતી વખતે, લો વોલ્ટેજ અને હાઈ વોલ્ટેજ વિન્ડિંગ્સની સ્થિતિ એવી હશે કે ____________ માં
A OC પરીક્ષણ - h.v. ઓપન, SC ટેસ્ટ − l.v. શોર્ટ-સર્ક્યુટેડ
B OC પરીક્ષણ - l.v. ઓપન, SC ટેસ્ટ - h.v. શોર્ટ-સર્ક્યુટેડ
C OC પરીક્ષણ - l.v. ઓપન, SC ટેસ્ટ − l.v. શોર્ટ-સર્ક્યુટેડ
D OC પરીક્ષણ - h.v. ઓપન, SC ટેસ્ટ - h.v. શોર્ટ-સર્ક્યુટેડ
આગળનો MCQ ↓ Electrical Engineering · Transformers
2000/1000/500 ત્રણ વાઇન્ડિંગ ટ્રાન્સફોર્મરનો 3000V સપ્લાય સાથે ઓટો ટ્રાન્સફોર્મર તરીકે ઉપયોગ કરવાનો છે. 3500 V પર 1050 kVA ના બે લોડ અને 180 kVA 1000 V પર અન્ય એક લોડ. કુલ kVA પૂરા પાડવામાં આવશે
A 1230 kVA
B 1440 kVA
C 1680 kVA
D 1150 kVA
આગળનો MCQ ↓ Electrical Engineering · Transformers
Q32
Moderate 2025 ✓ ચકાસેલ
↗
Two single phase transformers A and B are operating in parallel having different impedance and identical x/r ratio. Then __________
A A has poorer pf than B
B B has poorer pf than B
C Lesser power factor angle
D Both operate at same power factor
આગળનો MCQ ↓ Electrical Engineering · Transformers
A vector is said to be solenoidal when its
A Divergence is zero
B Divergence is unity
C Curl is zero
D Curl is unity
આગળનો MCQ ↓ Electrical Engineering · Vector Calculus
Q34
Moderate 2025 ✓ ચકાસેલ
↗
A = x i y j z k માટે સ્ટોકના પ્રમેયનું મૂલ્ય શોધો. કાર્યની સ્થિતિ હશે
A સોલેનોઇડલ
B ભિન્ન
C રોટેશનલ
D કર્લફ્રી
આગળનો MCQ ↓ Electrical Engineering · Vector Calculus
Q35
Moderate 2025 ✓ ચકાસેલ
↗
પાવર શોધો, આપેલ ઊર્જા E = 2J અને વર્તમાન ઘનતા J = x2 x = 0 અને x = 1 થી બદલાય છે.
A 1/3
B 2/3
C 1
D 4/3
આગળનો MCQ ↓ Electrical Engineering · Energy and Power
Q36
Moderate 2025 ✓ ચકાસેલ
↗
Evaluate the surface integral ∫∫ (3x i + 2y j). dS, where S is the sphere given by x² + y² + z² = 9.
A 120 π
B 180 π
C 240 π
D 300 π
આગળનો MCQ ↓ Electrical Engineering · Vector Calculus
Q37
Moderate 2025 ✓ ચકાસેલ
↗
Three charged cylindrical sheets are present in three spaces with σ = 5 at R = 2m, σ = − 2 at R = 4m and σ = − 3 at R = 5m. Find the flux density at R = 3m.
A 3
B 10/3
C 11/3
D 4
આગળનો MCQ ↓ Electrical Engineering · Gauss Law
Q38
Moderate 2025 ✓ ચકાસેલ
↗
સાતત્ય સમીકરણ એ બેમાંથી કયા કાયદાનું સંયોજન છે?
A ઓહ્મનો કાયદો અને ગૌસ કાયદો
B એમ્પીયર કાયદો અને ગૌસ કાયદો
C ઓહ્મનો કાયદો અને એમ્પીયર કાયદો
D મેક્સવેલ કાયદો અને એમ્પીયર કાયદો
આગળનો MCQ ↓ Electrical Engineering · Maxwell Equations
ચાર્જ 28C અને કેપેસીટન્સ 12 mF ની મેટલ પ્લેટની સંભવિત ગણતરી કરો.
A 3.33 k ઓહ્મ
B 2.33 k ઓહ્મ
C 3.33 M ઓહ્મ
D 2.33 M ઓહ્મ
આગળનો MCQ ↓ Electrical Engineering · Electrostatics
Calculate the emf when the flux is given by 3sin t + 5cos t.
A 3cos t − 5sin t
B − 3cos t + 5sin t
C − 3sin t − 5cos t
D 3cos t + 5sin t
આગળનો MCQ ↓ Electrical Engineering · Electromagnetic Induction
Q41
Moderate 2025 ✓ ચકાસેલ
↗
Find the inductance of a coil with permeability 3.5, turns 100 and length 2m. Assume the area to be thrice the length.
A 131.94 mH
B 94.131 mH
C 131.94 H
D 94.131 H
આગળનો MCQ ↓ Electrical Engineering · Magnetic Circuits
જ્યારે 5 એકમોના વિદ્યુત ક્ષેત્ર સાથે સામગ્રીની પ્રતિકારકતા 4.5 એકમ હોય ત્યારે વહન વર્તમાન ઘનતાની ગણતરી કરો.
A 22.5
B 4.5/5
C 5/4.5
D 9.5
આગળનો MCQ ↓ Electrical Engineering · Conduction and Current Density
When can one logic gate drive many other logic gates in Digital Electronics?
A When its output impedance is low and the input impedance is low
B When its output impedance is high and the input impedance is high
C When its output impedance is high and the input impedance is low
D When its output impedance is low and the input impedance is high
આગળનો MCQ ↓ Electrical Engineering · Logic Families
Q44
Moderate 2025 ✓ ચકાસેલ
↗
Which of these error-detecting codes enables to find double errors in Digital Electronic devices?
A Parity method
B Checksum method
C Bit generation method
D Odd-Even method
આગળનો MCQ ↓ Electrical Engineering · Digital Codes
જો A અને B અડધા ઉમેરનારના ઇનપુટ છે, તો સરવાળો __________ દ્વારા આપવામાં આવે છે
A A અને B
B A અથવા B
C A XOR B
D એક ભૂતપૂર્વ નોર બી
આગળનો MCQ ↓ Electrical Engineering · Combinational Logic
લોજિક સર્કિટનો વ્યવસ્થિત ઘટાડો _______________ દ્વારા પરિપૂર્ણ થાય છે
A સાંકેતિક ઘટાડો
B TTL તર્ક
C બુલિયન બીજગણિતનો ઉપયોગ
D સત્ય કોષ્ટકનો ઉપયોગ કરવો
આગળનો MCQ ↓ Electrical Engineering · Boolean Algebra
How many inputs are required for a 1-of-10 BCD decoder?
A 4
B 8
C 10
D 2
આગળનો MCQ ↓ Electrical Engineering · Combinational Logic
What is the maximum possible range of bit-count specifically in n-bit binary counter consisting of ‘n’ number of flip-flops?
A 0 to 2n
B 0 to 2n + 1
C 0 to 2n − 1
D 0 to 2n+1/2
આગળનો MCQ ↓ Electrical Engineering · Sequential Logic
મોડ્યુલસ-5 કાઉન્ટર, મોડ્યુલસ-8 કાઉન્ટર અને મોડ્યુલસ-10 કાઉન્ટર ધરાવતા કાસ્કેડ કાઉન્ટર પર 12 મેગાહર્ટ્ઝ ઘડિયાળની આવર્તન લાગુ કરવામાં આવે છે. સૌથી ઓછી આઉટપુટ આવર્તન શક્ય છે ________
A 10 kHz
B 20 kHz
C 30 kHz
D 60 kHz
આગળનો MCQ ↓ Electrical Engineering · Sequential Logic
4-બીટ રિપલ કાઉન્ટરમાં ફ્લિપ-ફ્લોપ્સનો સમાવેશ થાય છે, જ્યાં દરેકમાં 15 nsના ઘડિયાળથી Q આઉટપુટ સુધી પ્રચારમાં વિલંબ હોય છે. કાઉન્ટરને 1111 થી 0000 સુધી રિસાયકલ કરવા માટે, તે કુલ ________ લે છે
A 15 એનએસ
B 30 એનએસ
C 45 એનએસ
D 60 એનએસ
આગળનો MCQ ↓ Electrical Engineering · Sequential Logic
Q51
Moderate 2025 ✓ ચકાસેલ
↗
બાયડાયરેક્શનલ 4-બીટ શિફ્ટ રજિસ્ટર નિબલ 1110 ને સ્ટોર કરે છે. તેનું ઇનપુટ ઓછું છે. નિબલ 0111 સીરીયલ ડેટા-ઇનપુટ લાઇન પર દાખલ થવાની રાહ જોઈ રહ્યું છે. બે ઘડિયાળના ધબકારા પછી, શિફ્ટ રજિસ્ટર ________ સંગ્રહિત કરે છે
A 1110
B 0111
C 1011
D 1001
આગળનો MCQ ↓ Electrical Engineering · Sequential Logic
Q52
Moderate 2025 ✓ ચકાસેલ
↗
The group of bits 10110111 is serially shifted (rightmost bit first) into an 8-bit parallel output shift register with an initial state 11110000. After two clock pulses, the register contains ____________
A 10111000
B 10110111
C 11110000
D 11111100
આગળનો MCQ ↓ Electrical Engineering · Sequential Logic
Q53
Moderate 2025 ✓ ચકાસેલ
↗
The output frequency related to the sampling interval of a frequency counter as _____________
A Directly with the sampling interval
B Inversely with the sampling interval
C More precision with longer sampling interval
D Less precision with longer sampling interval
આગળનો MCQ ↓ Electrical Engineering · Digital Measurement
Which type of device may be used to interface a parallel data format with external equipment’s serial format?
A UART
B Key matrix
C Memory chip
D Series in Parallel out
આગળનો MCQ ↓ Electrical Engineering · Data Communication Interfaces
A 4-bit shift register that receives 4 bits of parallel data will shift to the ________ by ________ position for each clock pulse.
A Right, one
B Right, two
C Left, one
D Left, three
આગળનો MCQ ↓ Electrical Engineering · Sequential Logic
બે-ટ્રાન્ઝિસ્ટર મોડેલના કિસ્સામાં (T1
A T1 અને T2 ના ઉત્સર્જક
B T1 નું ઉત્સર્જક અને T2 નો આધાર
C T1 નું ઉત્સર્જક અને T1 નો આધાર
D T1 નું ઉત્સર્જક અને T2 નું કલેક્ટર
આગળનો MCQ ↓ Electrical Engineering · Thyristor Devices
A step-down delta-star transformer, with per-phase turns ration of 5, is fed from a 3-phase, 1100 V, 50 Hz source. The secondary of this transformer through a 3-pulse type rectifier feeds a R load of 10 Ω. Find the maximum value of the load current (phase).
A √2 × 22 A
B 1 × 11 A
C √2 × 11 A
D 1 × 22 A
આગળનો MCQ ↓ Electrical Engineering · Rectifiers
Q58
Moderate 2025 ✓ ચકાસેલ
↗
In non-circulating current mode dual converters, the circulating current is avoided by
A Connecting a series reactor
B Maintaining α1 + α2 = 180°
C Operating only one converter
D Adding an extra SCR
આગળનો MCQ ↓ Electrical Engineering · Converters
In the single−pulse width modulation method, the output voltage waveform is symmetrical about ____________ in the negative half cycle.
A 2π
B 3π/2
C π/2
D 3π/4
આગળનો MCQ ↓ Electrical Engineering · Inverters
Q60
Moderate 2025 ✓ ચકાસેલ
↗
In the case of a single−pulse width modulation with the pulse width = 2d, to eliminate the nth harmonic from the output voltage
A d = π
B 2d = π
C nd = π
D nd = 2π
આગળનો MCQ ↓ Electrical Engineering · Inverters
એસી વોલ્ટેજ નિયંત્રકોનો ઉપયોગ _________ એપ્લિકેશનમાં થાય છે.
A વીજ ઉત્પાદન
B ઇલેક્ટ્રિક હીટિંગ
C કન્વેયર બેલ્ટ ગતિ
D પાવર ટ્રાન્સમિશન
આગળનો MCQ ↓ Electrical Engineering · AC Voltage Controllers
Q62
Moderate 2025 ✓ ચકાસેલ
↗
એન-સ્ટેજ સિક્વન્સ કંટ્રોલરમાં, દરેક ગૌણને __________ માટે રેટ કરવામાં આવે છે
A n × વિ
B વિ
C વિ/એન
D વિ × (n − 1)
આગળનો MCQ ↓ Electrical Engineering · High Voltage Generation
સિંગલ-ફેઝ મિડ-પોઇન્ટ પ્રકારનું સાયક્લોકોન્વર્ટર _________ નંબર SCR નો ઉપયોગ કરે છે.
A 4
B 8
C 6
D 2
આગળનો MCQ ↓ Electrical Engineering · Cycloconverters
Two six pulse converters used for bipolar HVDC transmission system are rated at 1000 MW, ± 200 kV. What is the DC transmission voltage?
A 200 kV
B 400 kV
C 500 kV
D 100 kV
આગળનો MCQ ↓ Electrical Engineering · HVDC Transmission
A single−phase AC switch is used in between a 230 V source and load of 2 kW and 0.8 lagging power factor. Determine the rms current rating required by the SCR. Use the factor of safety = 2.
A 10.87 A
B 87 A
C 21.74 A
D 32 A
આગળનો MCQ ↓ Electrical Engineering · AC Controllers
Q66
Moderate 2025 ✓ ચકાસેલ
↗
ખોટું નિવેદન પસંદ કરો.
A SMPS ઇનપુટ વોલ્ટેજ ભિન્નતાઓ માટે ઓછું સંવેદનશીલ છે
B રેક્ટિફાયર્સની તુલનામાં SMPS નાનું છે
C SMPSમાં ઓછી ઇનપુટ રિપલ છે
D SMPS એ રેડિયો હસ્તક્ષેપનો સ્ત્રોત છે
આગળનો MCQ ↓ Electrical Engineering · Switched Mode Power Supplies
Q67
Moderate 2025 ✓ ચકાસેલ
↗
નીચેનામાંથી કયો સંકેત મોનોટોનિક છે?
A x(t) = t³− 2t
B x(t) = sin(t)
C x(t) = sin²(2t) cos²(2t) − 2t
D x(t) = લોગ(cos(t))
આગળનો MCQ ↓ Electrical Engineering · Signal Classification
When is x(t) said to be non-periodic signal?
A If the equation x (t) = x (t + T) is satisfied for all values of T
B If the equation x (t) = x (t + T) is satisfied for only one value of T
C If the equation x (t) = x (t + T) is satisfied for no values of T
D If the equation x (t) = x (t + T) is satisfied for only odd values of T
આગળનો MCQ ↓ Electrical Engineering · Signal Classification
અલગ-સમય સંકેત નક્કી કરો: n ≥ 0 માટે x(n) = 1 અને n માટે x(n) = 0
A એકમ રેમ્પ ક્રમ
B એકમ આવેગ ક્રમ
C ઘાતાંકીય ક્રમ
D એકમ પગલું ક્રમ
આગળનો MCQ ↓ Electrical Engineering · Discrete-Time Signals
Q70
Moderate 2025 ✓ ચકાસેલ
↗
For what values of k is the following system stable, y = (k² − 3k − 4)log(x) + sin(x)?
A k = 1, 4
B k = 2, 3
C k = 5, 4
D k = 4, − 1
આગળનો MCQ ↓ Electrical Engineering · Systems
440 V, 50 Hz AC સ્ત્રોત કેપેસિટર અને કોઇલ સાથે શ્રેણીબદ્ધ LCR સર્કિટ પૂરો પાડે છે. જો કોઇલમાં 100 mΩ પ્રતિકાર અને 15 mH ઇન્ડક્ટન્સ હોય, તો 50 Hz ની રેઝોનન્સ ફ્રીક્વન્સી પર, સર્કિટની અડધી પાવર ફ્રીક્વન્સી ______________ છે
A 50.53 હર્ટ્ઝ, 49.57 હર્ટ્ઝ
B 52.12 હર્ટ્ઝ, 49.8 હર્ટ્ઝ
C 55.02 હર્ટ્ઝ, 48.95 હર્ટ્ઝ
D 50 હર્ટ્ઝ, 49 હર્ટ્ઝ
આગળનો MCQ ↓ Electrical Engineering · RLC Circuits
A signal e^(−at) sin (ωt) is the input to a real linear time invariant system. Given K and ∅ are constants, the output of the system will be of the form Ke^(−bt) sin (vt + ∅). The correct statement among the following is __________
A b need not be equal to a but v must be equal to ω
B v need not be equal to ω but b must be equal to a
C b must be equal to a and v must be equal to ω
D b need not be equal to a and v need not be equal to ω
આગળનો MCQ ↓ Electrical Engineering · LTI Systems
Q73
Moderate 2025 ✓ ચકાસેલ
↗
સામયિક ચોરસ તરંગ −1 થી 1 અને સમયગાળા = 2 એકમોની લંબચોરસ કઠોળ દ્વારા રચાય છે. આ વેવફોર્મ માટે 7મા હાર્મોનિકમાં પાવર અને 5મા હાર્મોનિકમાં પાવરનો ગુણોત્તર ____________ જેટલો છે
A 1
B 0.5
C 2
D 2.5
આગળનો MCQ ↓ Electrical Engineering · Fourier Series
Q74
Moderate 2025 ✓ ચકાસેલ
↗
ફોરિયર કન્વર્જન્સ પ્રમેય ક્યારે લાગુ પડે છે?
A અનંત શ્રેણી મર્યાદા
B સતત કાર્ય મર્યાદા
C અલગ કાર્ય મર્યાદા
D વિરામ બિંદુ મર્યાદા
આગળનો MCQ ↓ Electrical Engineering · Fourier Series
નીચેનામાંથી કયા તરંગોમાં પીક ફેક્ટરનું મૂલ્ય સૌથી વધુ છે?
A ચોરસ તરંગ
B સાઈન વેવ
C અર્ધ તરંગ સુધારેલ સાઈન વેવ
D ત્રિકોણાકાર તરંગ
આગળનો MCQ ↓ Electrical Engineering · Waveform Parameters
Time constant of an inductive circuit
A increases with the increase of inductance and the decrease of resistance
B increases with the increase of inductance and the increase of resistance
C increases with the decrease of inductance and the decrease of resistance
D increases with the decrease of inductance and the increase of resistance
આગળનો MCQ ↓ Electrical Engineering · First-Order Circuits
Q77
Moderate 2025 ✓ ચકાસેલ
↗
The impulse response of an LTI system which is continuous is H (t) = e−|t|. The system is ___________
A Causal and stable
B Causal but not stable
C Stable but not causal
D Neither causal nor stable
આગળનો MCQ ↓ Electrical Engineering · LTI Systems
Q78
Moderate 2025 ✓ ચકાસેલ
↗
Form factor is equal to peak factor in the case of
A Square wave
B Triangle wave
C Saw tooth wave
D Sinusoidal wave
આગળનો MCQ ↓ Electrical Engineering · Waveform Parameters
સપ્રમાણ ખામી પછી સિંક્રનસ જનરેટરમાં નીચેનામાંથી કઈ પ્રતિક્રિયા પ્રથમ દૂર કરવામાં આવે છે?
A લિકેજ પ્રતિક્રિયા
B ડેમ્પર વિન્ડિંગ પ્રતિક્રિયા
C આર્મેચર વિન્ડિંગ પ્રતિક્રિયા
D ક્ષેત્ર વિન્ડિંગ પ્રતિક્રિયા
આગળનો MCQ ↓ Electrical Engineering · Fault Analysis
A transmission line Z = (2 + j8) Ω has 10% of the voltage regulation with the lagging load of 0.8. If the load is 0.707 leading, then the V.R. is ________ (Assume the current is same in both cases)
A − 6.63%
B − 5.77%
C − 10%
D − 8.63%
આગળનો MCQ ↓ Electrical Engineering · Transmission Lines
ખુલ્લી પાઇપ 500 હર્ટ્ઝની આવર્તનના ટ્યુનિંગ ફોર્ક સાથે પડઘો પાડે છે. એવું અવલોકન કરવામાં આવે છે કે બે ક્રમિક ગાંઠો ખુલ્લા છેડાથી 16 સેમી અને 46 સેમીના અંતરે રચાય છે. પાઇપમાં હવામાં અવાજની ગતિ છે
A 230 m/s
B 300 મી/સે
C 320 m/s
D 360 m/s
આગળનો MCQ ↓ Electrical Engineering · Waves and Acoustics
400/33000 V નો લાઇન વોલ્ટેજ રેશિયો ધરાવતો થ્રી-ફેઝ ટ્રાન્સફોર્મર સ્ટાર-ડેલ્ટામાં જોડાયેલ છે. 400V બાજુના CT નો CT રેશિયો 1000/5 છે. 33000 બાજુ પર CT નો ગુણોત્તર શું હોવો જોઈએ?
A 7/5
B 5/7
C 3/5
D 5/2
આગળનો MCQ ↓ Electrical Engineering · Protection
ત્રણ તબક્કાના 20 MVA, 11 kV અલ્ટરનેટરના ન્યુટ્રલને 5 ઓહ્મના પ્રતિકાર દ્વારા માટી કરવામાં આવે છે. જ્યારે 1.5 A ના બેલેન્સ કરંટ હોય ત્યારે રિલે ઓપરેટ કરવા માટે સેટ કરવામાં આવે છે. CT નો રેશિયો 100/5 હોય છે. 90% વિન્ડિંગને સુરક્ષિત રાખવા અર્થિંગ પ્રતિકારનું લઘુત્તમ મૂલ્ય શું હોવું જોઈએ?
A 1.12 Ω
B 2.12 Ω
C 4.24 Ω
D 3.24 Ω
આગળનો MCQ ↓ Electrical Engineering · Protection
Q84
Moderate 2025 ✓ ચકાસેલ
↗
સિંગલ-ફેઝ મોટર 400V, 50Hz સપ્લાય સાથે જોડાયેલ છે. મોટર પાવર ફેક્ટર 0.7 લેગ પર 31.7A નો પ્રવાહ ખેંચે છે. કેપેસિટર બેંક દ્વારા પૂરી પાડવામાં આવનાર વધારાની પ્રતિક્રિયાશીલ શક્તિ (VAR માં) ___________ હશે
A 4756
B 4873
C 4299 પર રાખવામાં આવી છે
D 9055.3
આગળનો MCQ ↓ Electrical Engineering · Power Factor Correction
Q85
Moderate 2025 ✓ ચકાસેલ
↗
એક અલગ જનરેટર તેની સતત મહત્તમ શક્તિ 20 MW, 50 Hz સાથે ટર્બાઇન સાથે જોડાયેલ છે. જનરેટર 8 મેગાવોટના બે લોડ સાથે જોડાયેલ છે, દરેક 50 હર્ટ્ઝ પર કાર્ય કરે છે. જનરેટરમાં 5% ડ્રોપ લાક્ષણિકતા છે. જો 6 મેગાવોટનો વધારાનો ભાર ઉમેરવામાં આવે, તો આવર્તન ___________ હશે
A 40.75
B 48.75
C 49.75
D 50.25
આગળનો MCQ ↓ Electrical Engineering · Load Frequency Control
જો પાવર સિસ્ટમમાં ફોલ્ટ પોઈન્ટ પરના તમામ સિક્વન્સ વોલ્ટેજ સમાન હોય, તો ફોલ્ટ __________ છે
A LLG દોષ
B એલજી ખામી
C થ્રી ફેઝ ટુ ગ્રાઉન્ડ ફોલ્ટ
D લાઇન ટુ લાઇન ફોલ્ટ
આગળનો MCQ ↓ Electrical Engineering · Fault Analysis
Q87
Moderate 2025 ✓ ચકાસેલ
↗
The characteristic equation of a control system is given by s(s + 4)(s² + 2s + s) + k(s + 1) = 0. What are the angles of the asymptotes for the root loci?
A 0°, 180°, 300°
B 0°, 120°, 240°
C 60°, 180°, 300°
D 120°, 180°, 240°
આગળનો MCQ ↓ Electrical Engineering · Root Locus
The unit step response of a second order system is = 1 − e^(−5t) − 5t e^(−5t). Consider the following statements: 1. The under damped natural frequency is 5 rad/s. 2. The damping ratio is 1. 3. The impulse response is 25t e^(−5t). Which of the statements given above are correct?
A Only 1 and 2
B Only 2 and 3
C Only 1 and 3
D 1, 2 and 3
આગળનો MCQ ↓ Electrical Engineering · Second-Order Systems
Q89
Moderate 2025 ✓ ચકાસેલ
↗
Assertion (A): A PI controller increases the order of the system by units but decreases the steady state error. Reason (R): A PI controller introduces a pole at either the origin or at a desired points on the negative real axis.
A Both (A) and (R) are true and (R) is the correct explanation of (A)
B Both (A) and (R) true but (R) is not the correct explanation of (A)
C (A) is true but (R) is false
D (A) is false but (R) is true
આગળનો MCQ ↓ Electrical Engineering · Controllers
Q90
Moderate 2025 ✓ ચકાસેલ
↗
Assertion (A): Routh criterion is in terms of array formulation which is more convenient to handle. Reason (R): This method is used to investigate the method of stability of higher order systems.
A Both (A) and (R) are true and (R) is the correct explanation of (A)
B Both (A) and (R) are true and (R) is not the correct explanation of (A)
C (A) is true but (R) is false
D (A) is false but (R) is true
આગળનો MCQ ↓ Electrical Engineering · Stability
The auto-correlation function of a rectangular pulse of duration T is
A A rectangular pulse of duration T
B A rectangular pulse of duration 2T
C A triangular pulse of duration T
D A triangular pulse of duration 2T
આગળનો MCQ ↓ Electrical Engineering · Signals and Systems
Q92
Moderate 2025 ✓ ચકાસેલ
↗
The method of investigating the stability using Liapunov function is _____________
A The direct method
B The indirect method
C Not determined
D Always unstable
આગળનો MCQ ↓ Electrical Engineering · Nonlinear Control
For a unity feedback system, the open loop transfer function is G(s) = K(s + 2)/s² (s² + 7s + 12). What is the type of system?
A One
B Two
C Three
D Four
આગળનો MCQ ↓ Electrical Engineering · Steady-State Error
What is the response of the feedback function with open loop transfer function G(s) = 4/s(s + 5) and input is input step?
A 1 − 1/3(4e^(−t) − e^(−4t))
B 1 − 1/2(6e^(−t) − e^(−4t))
C 1 − 1/3(6e^(−t) − e^(−4t))
D 1 − 1/2(4e^(−t) − e^(4t))
આગળનો MCQ ↓ Electrical Engineering · Time Response
The open loop transfer function for a unit feedback system is G(s) = K/s(sT + 1). By what factor the amplitude gain K should be reduced so that the peak overshoot becomes 25% from 75%?
A 75
B 25
C 20
D 10
આગળનો MCQ ↓ Electrical Engineering · Transient Response
What is the need for a controller?
A Receive control signals
B Transmit control signals
C Modify control signals
D Create control signals
આગળનો MCQ ↓ Electrical Engineering · Controllers
What is the vectored address of RST-5?
A 0010 H
B 0032 H
C 0028 H
D 0030 H
આગળનો MCQ ↓ Electrical Engineering · 8085 Microprocessor
DAA instruction is used to perform which type of addition?
A BCD addition
B Excess-3 addition
C Binary addition
D Octal addition
આગળનો MCQ ↓ Electrical Engineering · 8085 Microprocessor
In the I/O mode, the 8255 ports work as
A Reset pins
B Set pins
C Programmable I/O ports
D Only output ports
આગળનો MCQ ↓ Electrical Engineering · 8255 PPI
Q100
Moderate 2025 ✓ ચકાસેલ
↗
જો પિન STB (સ્ટ્રોબ ઇનપુટ) ની કિંમત નીચા સ્તરે આવે છે, તો પછી
A ઇનપુટ પોર્ટ ઇનપુટ latches માં લોડ થયેલ છે
B ઇનપુટ પોર્ટ આઉટપુટ latches માં લોડ થયેલ છે
C આઉટપુટ પોર્ટ ઇનપુટ latches માં લોડ થયેલ છે
D આઉટપુટ પોર્ટ આઉટપુટ latches માં લોડ થયેલ છે
આગળનો MCQ ↓ Electrical Engineering · 8255 PPI
When a stack segment is initialised, then
A SS and SP are initialised
B Only SS is initialised
C Only SP is initialised
D SS and SP need not be initialised
આગળનો MCQ ↓ Electrical Engineering · 8086 Microprocessor
Q102
Moderate 2025 ✓ ચકાસેલ
↗
મોડ 2 માં, જો N ને ગણતરી મૂલ્ય તરીકે લોડ કરવામાં આવે છે, તો પછી (N − 1) ચક્ર પછી, આઉટપુટ નીચું થઈ જાય છે
A 1 ઘડિયાળ ચક્ર
B 2 ઘડિયાળ ચક્ર
C 3 ઘડિયાળ ચક્ર
D 4 ઘડિયાળ ચક્ર
આગળનો MCQ ↓ Electrical Engineering · 8253/8254 Timer
Q103
Moderate 2025 ✓ ચકાસેલ
↗
જો શૂન્ય શરત સંતુષ્ટ હોય તો, અમલ માટે, JNZ સૂચના લે છે
A 1 ઘડિયાળ ચક્ર
B 2 ઘડિયાળ ચક્ર
C 3 ઘડિયાળ ચક્ર
D 4 ઘડિયાળ ચક્ર
આગળનો MCQ ↓ Electrical Engineering · Microprocessor Instructions
પિન કે જે આદેશ, વિનંતી અને કામચલાઉ રજિસ્ટર અને આંતરિક પ્રથમ/છેલ્લી ફ્લિપફ્લોપને જ્યારે સેટ કરવામાં આવે ત્યારે સાફ કરે છે
A સાફ કરો
B સેટ
C એચએલડીએ
D રીસેટ કરો
આગળનો MCQ ↓ Electrical Engineering · DMA Controller
સંપૂર્ણ સોફ્ટવેર સિસ્ટમ વિભાજિત થયેલ છે
A મુખ્ય કાર્યક્રમ
B એકમને પ્રથમ સબપ્રોસેસ કરવા માટે નિયમિત IRT2 ને વિક્ષેપિત કરો
C પ્રથમ એકમ સબપ્રોસેસિંગ માટે નિયમિત IRT3 માં વિક્ષેપ
D ઉલ્લેખિત તમામ
આગળનો MCQ ↓ Electrical Engineering · Real-Time Software
Q106
Moderate 2025 ✓ ચકાસેલ
↗
અન્ય કોઈપણ ઉપયોગ કરતાં સૌથી વધુ પ્રાધાન્યતા વપરાશ છે
A LOCK (સક્રિય નીચા) સિગ્નલ સાથે ટ્રાન્સફર કરો
B વિનંતી પકડી રાખો
C પ્રોસેસર એક્સ્ટેંશન ડેટા ટ્રાન્સફર
D EU (એક્ઝિક્યુશન યુનિટ) દ્વારા કરવામાં આવેલ ડેટા ટ્રાન્સફર
આગળનો MCQ ↓ Electrical Engineering · 8086/80286 Bus
એક માન્ય હોલ્ડ વિનંતી પૂર્ણ થયા પછી જ નિશ્ચિત કરવામાં આવે છે
A 34 ઘડિયાળ ચક્ર
B 24 ઘડિયાળ ચક્ર અને 80286 SET છે
C 34 ઘડિયાળ ચક્ર અને 80286 SET છે
D 34 ઘડિયાળ ચક્ર અને 80286 રીસેટ છે
આગળનો MCQ ↓ Electrical Engineering · 80286 Microprocessor
8259A સ્પીડ અને કાસ્કેડ એડ્રેસ આઉટપુટ વિલંબને પહોંચી વળવા માટે બે INTA સાયકલની વચ્ચે માન્ય નિષ્ક્રિય સ્થિતિ (Ti) ની સંખ્યા
A 1
B 2
C 3
D 4
આગળનો MCQ ↓ Electrical Engineering · 8259A PIC
Q109
Moderate 2025 ✓ ચકાસેલ
↗
HVDC LCCs have ______________
A 1 degree of freedom
B 2 degrees of freedom
C 5 degrees of freedom
D Many degrees of freedom
આગળનો MCQ ↓ Electrical Engineering · HVDC Transmission
Efficient LCC HVDC converters generally use __________
A thyristor
B mercury valves
C diodes
D mechanical switches
આગળનો MCQ ↓ Electrical Engineering · HVDC Transmission
Which insulating material is commonly used in high voltage cables?
A XLPE (Cross-linked polyethylene)
B PVC (Polyvinyl chloride)
C Wood
D Rubber
આગળનો MCQ ↓ Electrical Engineering · High Voltage Engineering
How the sag at higher stages can be reduced in a voltage multiplier circuit?
A By decreasing the capacitance in the higher stages
B By decreasing the capacitance in the lower stages
C By increasing the capacitance in the higher stages
D By increasing the capacitance in the lower stages
આગળનો MCQ ↓ Electrical Engineering · High Voltage Engineering
Q113
Moderate 2025 ✓ ચકાસેલ
↗
__________ is the normal length of the cable sample used for testing.
A 1 - 50 cm
B 50cm - 10 m
C 10 - 100 m
D Above 100 m
આગળનો MCQ ↓ Electrical Engineering · High Voltage Engineering
__________ બુશિંગના ઇન્સ્યુલેશનમાં થતા આંતરિક સ્રાવને કારણે બગાડ અથવા નિષ્ફળતા શોધે છે.
A પાવર-ફેક્ટર વોલ્ટેજ ટેસ્ટ
B આંતરિક અથવા આંશિક સ્રાવ પરીક્ષણ
C દૃશ્યમાન સ્રાવ પરીક્ષણ
D ક્ષણિક ટકી કસોટી
આગળનો MCQ ↓ Electrical Engineering · High Voltage Engineering
RMS મૂલ્ય નીચેનામાંથી કયાના આધારે વ્યાખ્યાયિત કરવામાં આવે છે?
A હીટિંગ અસર
B ચાર્જ ટ્રાન્સફર
C વર્તમાન
D વોલ્ટેજ
આગળનો MCQ ↓ Electrical Engineering · AC Fundamentals
Q116
Moderate 2025 ✓ ચકાસેલ
↗
A physical system of electromechanical energy conversion consists of a stationary part creating a magnetic field with electric energy input, and a moving part giving mechanical energy output. If the movable part is kept fixed, the entire electrical energy input will be _______
A Stored in the magnetic field
B Stored in the electric field
C Divided equally between the magnetic and electric fields
D Zero
આગળનો MCQ ↓ Electrical Engineering · Electromechanical Energy Conversion
Which of the following has the highest operating cost?
A Hydroelectric power plant
B Thermal power plant
C Nuclear power plant
D Solar electric power plant
આગળનો MCQ ↓ Electrical Engineering · Power Plant Economics
નીચેનામાંથી કયો વાર્ષિક સરેરાશ ભાર દર્શાવે છે?
A (kWh એક દિવસમાં સપ્લાય થાય છે) / 24
B {(kWh એક દિવસમાં સપ્લાય કરેલ) / 24} × 365
C {(kWh એક મહિનામાં સપ્લાય) / (30 × 24)
D (kWh એક વર્ષમાં સપ્લાય) / (24 × 365)
આગળનો MCQ ↓ Electrical Engineering · Load Curves and Tariffs
નીચેનામાંથી કોને કોલ્ડ રિઝર્વ કહેવામાં આવે છે?
A અનામત ક્ષમતા ઉપલબ્ધ છે પરંતુ ઉપયોગ માટે તૈયાર નથી
B અનામત ક્ષમતા ઉપલબ્ધ છે અને ઉપયોગ માટે તૈયાર છે
C જનરેટ કરવાની ક્ષમતા બસ સાથે જોડાયેલ છે અને લોડ લેવા માટે તૈયાર છે
D પીક લોડ કરતા વધારે સેવામાં ક્ષમતા
આગળનો MCQ ↓ Electrical Engineering · Power System Operation
When the momentum of a body is doubled, its kinetic energy ___________
A Remains the same
B Drops to zero
C Becomes four times its initial kinetic energy
D Becomes ten times its kinetic energy
આગળનો MCQ ↓ Electrical Engineering · Engineering Mechanics
In a thermal power station, coal is used for the generation of electricity. How energy changes from one form to another before it is transformed into electrical energy?
A Heat energy → Mechanical energy → Electrical energy
B Heat energy → Electrical energy → Mechanical energy
C Mechanical energy → Heat energy → Electrical energy
D Electrical energy → Heat energy → Mechanical energy
આગળનો MCQ ↓ Electrical Engineering · Thermal Power Plants
સ્ટીમ પાવર પ્લાન્ટમાં બોઈલરનું પ્રાથમિક કાર્ય શું છે?
A યાંત્રિક ઊર્જાને વિદ્યુત ઊર્જામાં રૂપાંતરિત કરવા
B પાણીને વરાળમાં રૂપાંતરિત કરવા
C વરાળ નીચે ઠંડુ કરવા માટે
D વરાળનું દબાણ વધારવા માટે
આગળનો MCQ ↓ Electrical Engineering · Steam Power Plants
સ્ટીમ પાવર પ્લાન્ટમાં કન્ડેન્સરનો હેતુ શું છે?
A વરાળને પાણીમાં પાછું ફેરવવા માટે
B વરાળનું તાપમાન વધારવા માટે
C વીજળી ઉત્પન્ન કરવી
D ટર્બાઇનની ઝડપને નિયંત્રિત કરવા માટે
આગળનો MCQ ↓ Electrical Engineering · Steam Power Plants
નીચેનામાંથી કયું બળતણ સ્ટીમ પાવર પ્લાન્ટમાં વપરાતું નથી?
A કોલસો
B કુદરતી ગેસ
C યુરેનિયમ
D તેલ
આગળનો MCQ ↓ Electrical Engineering · Steam Power Plants
What is the efficiency of a typical steam power plant?
A 10-20%
B 30-40%
C 50-60%
D 70-80%
આગળનો MCQ ↓ Electrical Engineering · Steam Power Plants
What is the function of a cooling tower in a steam power plant?
A To cool down the steam
B To cool down the water from the condenser
C To generate electricity
D To control the pressure of the steam
આગળનો MCQ ↓ Electrical Engineering · Steam Power Plants
A new renewable energy system is designed to harvest energy from wind. The total energy required to build the system is 240 kJ. The energy yield ratio of the system is 14:3. What will be the total energy provided by the system over its lifetime?
A 1,120 kJ
B 18,000 kJ
C 2,258 kJ
D 54,000 kJ
આગળનો MCQ ↓ Electrical Engineering · Renewable Energy
સંયુક્ત રાષ્ટ્રના આઠ સહસ્ત્રાબ્દી ધ્યેયોમાંથી નીચેનામાંથી કયો 7મો ધ્યેય છે?
A અત્યંત ગરીબી અને ભૂખ નાબૂદ કરવા
B પર્યાવરણીય ટકાઉપણું સુનિશ્ચિત કરવા
C બાળ મૃત્યુદર ઘટાડવા માટે
D વિકાસ માટે વૈશ્વિક ભાગીદારી વિકસાવવી
આગળનો MCQ ↓ Electrical Engineering · Sustainable Development
2015 માં પેરિસ કરારનો હેતુ શું છે? (નોંધ: C સેલ્સિયસ સૂચવે છે)
A વૈશ્વિક સરેરાશ તાપમાનમાં થયેલા ઘટાડાને 2 ડિગ્રી સે.થી નીચે રાખવા માટે
B વૈશ્વિક સરેરાશ તાપમાનમાં 2 ડિગ્રી સેલ્સિયસથી વધુનો ઘટાડો જાળવી રાખવા
C વૈશ્વિક સરેરાશ તાપમાનના વધારાને 2 ડિગ્રી સે.થી ઉપર રાખવા માટે
D વૈશ્વિક સરેરાશ તાપમાનના વધારાને 2 ડિગ્રી સે.થી નીચે રાખવા માટે
આગળનો MCQ ↓ Electrical Engineering · Climate Policy
ભારતીય પરિવહન ક્ષેત્રમાં ઉર્જાનો વપરાશ શેના પર નિર્ભર છે?
A ઇંધણની કિંમત
B ડ્રાઈવર
C અર્ગનોમિક્સ
D બળતણ ટાંકી
આગળનો MCQ ↓ Electrical Engineering · Transport Energy
What is Sun’s declination angle during summer solstice?
A 23.5 degrees
B 0.53 degrees
C 32 minutes
D − 23.5 degrees
આગળનો MCQ ↓ Electrical Engineering · Solar Energy
ઔદ્યોગિક એન્જિનિયરિંગ અને મેનેજમેન્ટના સંદર્ભમાં "ગુણવત્તા નિયંત્રણ" શબ્દનો અર્થ શું છે?
A ઉત્પાદન ધોરણો અને સુસંગતતા જાળવવી
B નાણાકીય જોખમ વિશ્લેષણ
C કર્મચારી સંતોષની ખાતરી કરવી
D ઉત્પાદન ખર્ચની દેખરેખ
આગળનો MCQ ↓ Electrical Engineering · Quality Management
The primary objective of the __________ is to consolidate the laws relating to the generation, transmission, distribution, trading and use of electricity in India.
A Energy Conservation Act, 2001
B Electricity Act, 2003
C Indian Electricity Rules, 1956
D IS 3043
આગળનો MCQ ↓ Electrical Engineering · Electricity Legislation
અર્થિંગ માટે ભારતીય માનક પ્રથા સંહિતા __________ માં સ્પષ્ટ થયેલ છે.
A IS 732
B IS 3043
C IS 1956
D IS 2001
આગળનો MCQ ↓ Electrical Engineering · Indian Standards
The policy specifically addressing power generation from municipal solid waste in Gujarat is the __________.
A Gujarat Solar Power Policy-2021
B Gujarat Renewable Energy Policy-2023
C Gujarat Waste to Energy Policy-2022
D Gujarat Small Hydel Policy-2016
આગળનો MCQ ↓ Electrical Engineering · Renewable Energy Policy
The __________ provides for the efficient use of energy and its conservation in India.
A Electricity Act, 2003
B Gujarat Electricity Industry Act, 2003
C Energy Conservation Act, 2001
D Indian Electricity Rules, 1956
આગળનો MCQ ↓ Electrical Engineering · Energy Legislation
The Indian Standard, IS 732 provides the code of practice for __________.
A Electrical wiring installations
B Earthing systems
C Solar panel manufacturing
D Wind turbine installation
આગળનો MCQ ↓ Electrical Engineering · Indian Standards
વિદ્યુત નિયમનકારી આયોગનું મુખ્ય કાર્ય __________નું નિર્ધારણ છે.
A ઇંધણ આયાત ક્વોટા
B રાજકીય ચૂંટણીની તારીખો
C વીજળી માટે ટેરિફ
D ઉત્પાદન સબસિડી
આગળનો MCQ ↓ Electrical Engineering · Electricity Regulation
ગુજરાત પવન ઉર્જા નીતિની સ્થાપના __________ માં કરવામાં આવી હતી.
A 2016
B 2018
C 2021
D 2023
આગળનો MCQ ↓ Electrical Engineering · Renewable Energy Policy
યાદીમાં ઉલ્લેખિત ગુજરાત સોલાર પાવર પોલિસી __________ માં બહાર પાડવામાં આવી હતી.
A 2016
B 2019
C 2021
D 2022
આગળનો MCQ ↓ Electrical Engineering · Renewable Energy Policy
વિન્ડ સોલર હાઇબ્રિડ પાવર પોલિસીનો પ્રાથમિક ધ્યેય ____________ છે.
A કોલસા આધારિત પાવર પ્લાન્ટ્સને પ્રોત્સાહન આપો
B પવન અને સૌર ફાર્મના અલગ-અલગ વિકાસને પ્રોત્સાહિત કરો
C પવન અને સૌર જનરેશનને જોડીને જમીન અને ગ્રીડ ઈન્ફ્રાસ્ટ્રક્ચરને શ્રેષ્ઠ બનાવો
D તમામ નવીનીકરણીય ઉર્જાનો તબક્કો દૂર કરો
આગળનો MCQ ↓ Electrical Engineering · Renewable Energy Policy
ગુજરાત વિદ્યુત ઉદ્યોગ (પુનઃરચના
A 2001
B 1956
C 2003
D 2016
આગળનો MCQ ↓ Electrical Engineering · Electricity Legislation
ઉપકરણો માટે સ્ટાર લેબલીંગ પ્રોગ્રામ, જે ઉર્જા કાર્યક્ષમતા દર્શાવે છે, તે __________ હેઠળ એક મુખ્ય પહેલ છે.
A બ્યુરો ઓફ એનર્જી એફિશિયન્સી (BEE)
B ગુજરાત એનર્જી ડેવલપમેન્ટ એજન્સી (GEDA)
C સેન્ટ્રલ ઇલેક્ટ્રિસિટી ઓથોરિટી (CEA)
D ભારતીય માનક સંસ્થા (ISI)
આગળનો MCQ ↓ Electrical Engineering · Energy Efficiency
The Gujarat Small Hydel Policy of 2016 typically applies to hydroelectric projects with a station capacity upto __________.
A 10 MW
B 25 MW
C 50 MW
D 100 MW
આગળનો MCQ ↓ Electrical Engineering · Renewable Energy Policy
Q145
Moderate 2025 ✓ ચકાસેલ
↗
IS 3043 મુજબ, મોટા પાવર સ્ટેશન માટે પૃથ્વી કનેક્શનનો પ્રતિકાર શક્ય તેટલો ઓછો હોવો જોઈએ, આદર્શ રીતે __________ થી વધુ ન હોવો જોઈએ.
A 0.5 Ω
B 2.0 Ω
C 5.0 Ω
D 10.0 Ω
આગળનો MCQ ↓ Electrical Engineering · Indian Standards
એપેલેટ ટ્રિબ્યુનલ ફોર ઇલેક્ટ્રિસિટી (APTEL) ની સ્થાપના __________ દ્વારા ફરજિયાત કરવામાં આવી હતી.
A ભારતીય વીજળી નિયમો, 1956
B એનર્જી કન્ઝર્વેશન એક્ટ, 2001
C વીજળી અધિનિયમ, 2003
D IS 732
આગળનો MCQ ↓ Electrical Engineering · Electricity Legislation
IS 732 મુજબ, લવચીક કેબલમાં અર્થ વાયરનો રંગ કોડ __________ છે.
A લાલ
B કાળો
C લીલા
D વાદળી
આગળનો MCQ ↓ Electrical Engineering · Indian Standards
2023ની ગુજરાત રિન્યુએબલ એનર્જી પોલિસી અગાઉની પોલિસીઓને બદલે અને RE સેક્ટરમાં ____________ ને આકર્ષવા માટે રજૂ કરવામાં આવી હતી.
A વિદેશી પ્રવાસીઓ
B જંગી રોકાણ
C કૃષિ કામદારો
D આઇટી કંપનીઓ
આગળનો MCQ ↓ Electrical Engineering · Renewable Energy Policy
1956ના ભારતીય વિદ્યુત નિયમો મોટાભાગે વિદ્યુત ક્ષેત્રમાં _________ ને સુનિશ્ચિત કરવા પર કેન્દ્રિત હતા.
A નફાકારકતા
B સલામતી અને પુરવઠાના ધોરણો
C સ્પર્ધા
D ખાનગીકરણ
આગળનો MCQ ↓ Electrical Engineering · Electricity Legislation
The Energy Conservation Building Code (ECBC) was launched by the __________ to set energy performance standards for new commercial buildings.
A Bureau of Energy Efficiency (BEE)
B Ministry of Housing and Urban Affairs
C Gujarat RERA
D GEDA
આગળનો MCQ ↓ Electrical Engineering · Energy Efficiency
2016 ની ગુજરાત પવન ઉર્જા નીતિમાં જૂના, ઓછા કાર્યક્ષમ ____________ ના 'પુનઃશક્તિકરણ' માટેની જોગવાઈઓ સામેલ છે.
A સૌર પેનલ્સ
B વિન્ડ ટર્બાઇન
C હાઇડ્રો પ્લાન્ટ્સ
D ટ્રાન્સફોર્મર્સ
આગળનો MCQ ↓ Electrical Engineering · Renewable Energy Policy
The primary purpose of equipment earthing as per IS 3043 is to __________.
A Improve the power factor
B Provide a safe path for leakage/fault current to flow
C Stabilize the system frequency
D Reduce the electricity bill
આગળનો MCQ ↓ Electrical Engineering · Earthing and Safety
ગુજરાત સોલાર પાવર પોલિસી, 2021 નો સમયગાળો __________ છે.
A 2 વર્ષ
B 3 વર્ષ
C 5 વર્ષ
D 10 વર્ષ
આગળનો MCQ ↓ Electrical Engineering · Renewable Energy Policy
The policy that allows for setting up wind and solar projects at the same location to save land and transmission infrastructure is the __________.
A Gujarat Small Hydel Policy, 2016
B Gujarat Wind Solar Hybrid Power Policy, 2018-19
C Gujarat Waste to Energy Policy, 2022
D Gujarat Solar Power Policy, 2021
આગળનો MCQ ↓ Electrical Engineering · Renewable Energy Policy
Q155
Moderate 2025 ✓ ચકાસેલ
↗
As per IS 732, a leakage current in an installation should not exceed __________ of the full load current.
A 1/500th
B 1/1000th
C 1/5000th
D 1/100th
આગળનો MCQ ↓ Electrical Engineering · Indian Standards
નેશનલ લોડ ડિસ્પેચ સેન્ટર અને પ્રાદેશિક લોડ ડિસ્પેચ સેન્ટરની રચના __________ દ્વારા ફરજિયાત છે.
A એનર્જી કન્ઝર્વેશન એક્ટ, 2001
B વીજળી અધિનિયમ, 2003
C ભારતીય વીજળી નિયમો, 1956
D IS 3043
આગળનો MCQ ↓ Electrical Engineering · Electricity Legislation
The main objective of the Gujarat Electricity Industry (Reorganization & Regulation) Act, 2003 was aligned with the national policy of __________.
A Increasing coal imports
B Power sector reforms
C Banning all private players
D Nationalizing all power plants
આગળનો MCQ ↓ Electrical Engineering · Electricity Legislation
Q158
Moderate 2025 ✓ ચકાસેલ
↗
The 'Perform, Achieve and Trade' (PAT) scheme is a market-based mechanism to improve energy efficiency in large industries and is a part of the __________.
A Electricity Act, 2003
B National Action Plan on Climate Change (under BEE)
C Gujarat Waste to Energy Policy
D Indian Electricity Rules, 1956
આગળનો MCQ ↓ Electrical Engineering · Energy Efficiency
ગુજરાત એનર્જી ડેવલપમેન્ટ એજન્સી (GEDA) મુખ્યત્વે __________ પર કેન્દ્રિત છે.
A વીજળીના દરનું નિયમન કરવું
B ઊર્જા સંરક્ષણ અને નવીનીકરણીય ઊર્જાને પ્રોત્સાહન આપવું
C મોટા થર્મલ પાવર પ્લાન્ટનું સંચાલન
D રાજ્યની પાવર ગ્રીડનું સંચાલન
આગળનો MCQ ↓ Electrical Engineering · Renewable Energy Institutions
ઇલેક્ટ્રોમિકેનિકલ લિફ્ટ સિસ્ટમમાં, ગવર્નરનું પ્રાથમિક કાર્ય શું છે?
A દરવાજા ખોલવા અને બંધ કરવા
B ફ્લોર નંબર સૂચવવા માટે
C ઓવરસ્પીડિંગના કિસ્સામાં સલામતી બ્રેકને સક્રિય કરવા
D લિફ્ટની આંતરિક લાઇટિંગને નિયંત્રિત કરવા માટે
આગળનો MCQ ↓ Electrical Engineering · Vertical Transportation
સામાન્ય સલામતી ધોરણો મુજબ કોમર્શિયલ એસ્કેલેટર માટે ઝોકનો વિશિષ્ટ કોણ શું છે?
A 15 ડિગ્રી
B 30 ડિગ્રી
C 45 ડિગ્રી
D 60 ડિગ્રી
આગળનો MCQ ↓ Electrical Engineering · Vertical Transportation
Which component in a central air conditioning system is responsible for removing heat from the refrigerant?
A Evaporator
B Compressor
C Expansion valve
D Condenser
આગળનો MCQ ↓ Electrical Engineering · HVAC
NBC 2016 મુજબ, નીચેનામાંથી કયો આવશ્યક ભાર માનવામાં આવે છે જે કટોકટી પાવર સિસ્ટમ સાથે જોડાયેલ હોવો જોઈએ?
A સામાન્ય ઓફિસ વર્કસ્ટેશનો
B વોટર કૂલર
C ફાયર પંપ અને ફાયર એલાર્મ
D સુશોભન લાઇટિંગ
આગળનો MCQ ↓ Electrical Engineering · Building Safety
The 'cone of protection' method, specified in lightning protection standards, is used to determine the area protected by a
A Surge protector
B Lightning rod (air terminal)
C Grounding wire
D Fuse
આગળનો MCQ ↓ Electrical Engineering · Lightning Protection
કોમર્શિયલ બિલ્ડિંગમાં ડીઝલ જનરેટર (DG) સેટ કરવાનો મુખ્ય હેતુ શું છે?
A રોજનું વીજળીનું બિલ ઘટાડવા માટે
B સમગ્ર ઇમારતને પ્રાથમિક શક્તિ પ્રદાન કરવી
C ગ્રીડ આઉટેજ દરમિયાન બેકઅપ પાવર સ્ત્રોત તરીકે કાર્ય કરવા માટે
D માત્ર HVAC સિસ્ટમને પાવર આપવા માટે
આગળનો MCQ ↓ Electrical Engineering · Standby Power
What is the primary function of an RCCB (Residual Current Circuit Breaker) in an electrical system?
A To protect against over-voltage
B To protect against short circuits
C To protect against high-frequency noise
D To protect humans from electric shock due to earth faults
આગળનો MCQ ↓ Electrical Engineering · Electrical Protection
Which system is considered the central 'brain' for controlling and monitoring a building's mechanical and electrical equipment such as ventilation, lighting and power systems?
A CCTV System
B Public Address System
C Building Management System (BMS)
D Fire Alarm System
આગળનો MCQ ↓ Electrical Engineering · Building Automation
Which of the following is typically NOT controlled by a building's Audio-Video (AV) system?
A Projectors and screens in a conference room
B Background music system
C Video conferencing equipment
D The building's fire hydrant pressure
આગળનો MCQ ↓ Electrical Engineering · ELV Systems
કોમ્પ્યુટર નેટવર્કીંગમાં, કઈ ટોપોલોજીમાં તમામ ઉપકરણોને ગોળાકાર રીતે જોડવામાં આવે છે?
A તારો
B બસ
C રીંગ
D જાળીદાર
આગળનો MCQ ↓ Electrical Engineering · Computer Networking
Q170
Moderate 2025 ✓ ચકાસેલ
↗
What is a key area of focus introduced in the National Electrical Code (NEC) of India, 2023?
A Phasing out all incandescent lighting
B Mandating specific brands of wires
C Regulations for electrical vehicle charging infrastructure
D Prohibiting the use of aluminium wiring
આગળનો MCQ ↓ Electrical Engineering · Electrical Codes
ફાયર એલાર્મ સિસ્ટમમાં મેન્યુઅલ કોલ પોઈન્ટ (MCP)નું મુખ્ય કાર્ય શું છે?
A આપમેળે ધુમાડો શોધવા માટે
B વ્યક્તિને મેન્યુઅલી ફાયર એલાર્મ ટ્રિગર કરવાની મંજૂરી આપવા માટે
C ઘટના પછી એલાર્મને શાંત કરવા
D છંટકાવ સિસ્ટમ ચકાસવા માટે
આગળનો MCQ ↓ Electrical Engineering · Fire Alarm Systems
નવી સ્ટ્રીટ લાઇટિંગ પ્રોજેક્ટ્સ માટે હાલમાં કઈ લેમ્પ ટેકનોલોજી સૌથી વધુ ઊર્જા-કાર્યક્ષમ અને વ્યાપકપણે અપનાવવામાં આવી છે?
A ઉચ્ચ દબાણ સોડિયમ (HPS)
B બુધ વરાળ
C મેટલ હલાઇડ
D લાઇટ એમિટિંગ ડાયોડ (LED)
આગળનો MCQ ↓ Electrical Engineering · Lighting
સ્ટ્રીટ લાઇટિંગમાં, 'લ્યુમિનેર' શબ્દનો ઉલ્લેખ થાય છે
A માત્ર લાઇટ બલ્બ અથવા દીવો
B સહાયક ધ્રુવ
C લેમ્પ, હાઉસિંગ અને રિફ્લેક્ટર સહિત સંપૂર્ણ લાઇટિંગ ફિક્સ્ચર
D ભૂગર્ભ વિદ્યુત કેબલ
આગળનો MCQ ↓ Electrical Engineering · Lighting
ઊંચી ઇમારતોની પાણી પુરવઠા પ્રણાલીમાં પાણીના દબાણને વધારવા માટે કયા પ્રકારના પંપનો સૌથી વધુ ઉપયોગ થાય છે?
A પારસ્પરિક પંપ
B સબમર્સિબલ પંપ
C કેન્દ્રત્યાગી પંપ
D ડાયાફ્રેમ પંપ
આગળનો MCQ ↓ Electrical Engineering · Water Supply Systems
પંપનું 'કુલ હેડ' શું દર્શાવે છે?
A પંપનું ભૌતિક કદ
B મોટરની રોટેશનલ સ્પીડ
C ઘર્ષણના નુકસાન માટે હિસ્સો ધરાવતી કુલ ઊંચાઈ કે જેના પર પંપ પાણી ખસેડી શકે છે
D પાણીની માત્રા તે પ્રતિ મિનિટ ખસેડી શકે છે
આગળનો MCQ ↓ Electrical Engineering · Pumps
Q176
Moderate 2025 ✓ ચકાસેલ
↗
ગેલિયમ નાઇટ્રાઇડ (GaN) જેવા વાઇડ-બેન્ડગેપ (WBG) સેમિકન્ડક્ટર પાવર ઇલેક્ટ્રોનિક્સમાં લોકપ્રિય બની રહ્યા છે કારણ કે તેઓ _________ ઓફર કરે છે.
A સિલિકોન કરતાં ઓછી કિંમત
B પાવર કન્વર્ટર માટે ઉચ્ચ કાર્યક્ષમતા અને નાના કદ
C સરળ ઉત્પાદન પ્રક્રિયાઓ
D ખૂબ નીચા તાપમાને વધુ સારું પ્રદર્શન
આગળનો MCQ ↓ Electrical Engineering · Semiconductor Devices
The principle of operation for most common wireless charging pads for mobile devices is based on
A Static electricity
B Electromagnetic induction
C Solar radiation
D Piezoelectric effect
આગળનો MCQ ↓ Electrical Engineering · Emerging Electrical Technologies
In a traction lift, what is the function of the counterweight?
A It acts as an emergency brake
B It balances the weight of the lift car and a portion of its load to save energy
C It houses the lift control panel
D It generates electricity for the lift
આગળનો MCQ ↓ Electrical Engineering · Vertical Transportation
HVAC માં વેરિયેબલ એર વોલ્યુમ (VAV) સિસ્ટમ આ માટે ડિઝાઇન કરવામાં આવી છે
A પ્રવાહને સ્થિર રાખીને હવાના તાપમાનમાં ફેરફાર કરો
B હવાના પ્રવાહને તેના તાપમાનની જરૂરિયાતોને આધારે ઝોનમાં બદલો
C હવા પુરવઠાની ભેજ બદલો
D માત્ર બે ઝડપે કામ કરો, ઊંચી અને નીચી
આગળનો MCQ ↓ Electrical Engineering · HVAC
Q180
Moderate 2025 ✓ ચકાસેલ
↗
સંતુલિત ત્રણ તબક્કા માટે, 0.9 પાવર ફેક્ટર પર 10 kW ની ઇનપુટ પાવર સાથે ત્રણ વાયર સિસ્ટમ, બંને વોટમીટર પર રીડિંગ્સ અનુક્રમે _________ છે
A 7 kW, 3 kW
B 5000 W, 5000 W
C 7600 ડબ્લ્યુ, 1200 ડબ્લ્યુ
D 6350 ડબ્લ્યુ, 3650 ડબ્લ્યુ
Electrical Engineering · Three-Phase Circuits